FILTER GP-OIL 2898194 - Caterpillar

Electronic Tool Group (Communication Adapter)
The 7X1700 Communication Adapter is used to allow service tools and electronic controls talking on different data bases to communicate with each other.
It can connect to the Cat data link or the ATA (American Trucking Association) data link on the control side and to the ATA data link or RS232 data link on the service tool side; using the cables listed below.
These cables should be ordered separately through the parts system, depending on your application.
Refer to the Tool Guide for cable specifications. 7X-1412 Cable: ATA (American Truck Association) Control to 7X-1700.
7X-1570 Adapter Cable Assembly (Cable): Cat data link Control to 7X-1700.
7X-1414 Adapter Cable Assembly (Cable): 10-Pin Control to 7X-1570.
7X-1415 Adapter Cable Assembly (Cable): 4-Pin Control to 7X-1570.
7X-1420 Adapter Cable Assembly (Cable): 7X-1700 to ATA (American Truck Association) Service Tool (Plastic Port #1).
7X-1851 Adapter Cable Assembly (Cable): 7X-1700 to ATA (American Truck Association) Service Tool (Metal Port #1).
7X-1688 Adapter Cable Group (Cable): 7X-1700 to RS232 Service Tool
Software is also ordered separately through the Caterpillar Literature System as form NEXG4523. This is not a subscription.
While the software may change as functions are added to the Communication Adapter, there is no planned schedule of updates.
7X-6400 Electronic Tool Group [Digital Diagnostic Tool (DDT)]
The 7X-6400 DDT is a limited service tool for working with customer parameters on an individual type of engine.
It is the basic electronic tool for the Truck Engine DDTs. The addition of the appropriate SPM will allow it to function with 3406 Electronic Truck Engines, 3176 Truck Engines, or 3176 Engines in the Challenger 75.
It provides basic diagnostic, vehicle and engine status, and calibration displays. It also displays and allows for the modification of the respective Customer Specified Parameters.
The included 8T-5275 T-Harness supplies power to the DDT and allows it to communicate to the engine control. The 8T-5277 Cable Probe (Pulse Width Modulation Cable) is also included in the group.
DDT Service Program Modules (SPM)
The SPMs are ordered through the Caterpillar Literature System. When one is ordered you receive the SPM, a Tool Operating Manual, plastic pocket cards and decals to customize the DDT.
The version number is printed on the module and can also be displayed on the DDT screen under Mode 00.
NEXG4508 (3406B and 3406C Electronic Truck Engines) SPM: The NEXG4508 is software with no subscription for updates.
The NEXG4508 SPM is installed in the 7X-6400 DDT and turns it into a 8T-5282 DDT for 3406B and 3406C Electronic Truck Engines.
The NEXG4508 SPM provides all of the service functions for the 3406B and 3406C Electronic Truck Engine.
The present version number is V2.7.
The NEXG4508 SPM