FILTER GP-SECONDARY 2W1011 - Caterpillar

Control Maximum Speed     -     Yes     Yes    
Digital Speed Control Ramp Rate     -     Yes     Yes    
Crank Terminate RPM     -     Yes     Yes    
PTO and Throttle Lock Parameters     -    
Throttle Lock Feature Installation Status     -     Yes     Yes    
PTO Engine Speed Setting     -     Yes     Yes    
Throttle Lock Increment Speed Ramp Rate     -     Yes     Yes    
Throttle Lock Engine Set Speed     -     Yes     Yes    
Miscellaneous     -    
Monitoring Mode Shutdowns     -     Yes     Yes    
Limp Home Desired Engine Speed     -     Yes     Yes    
Engine Acceleration Rate     -     Yes     Yes    
Maintenance Parameters     -    
Maintenance Indicator Mode     -     Yes     Yes    
Maintenance Level 1 Cycle Interval Hours     -     Yes     Yes    
Configurable Inputs     -    
Coolant Level Sensor     -     Yes     Yes    
Air Filter Restriction Switch Installation Status     -     Yes     Yes    
Fuel/Water Separator Switch Installation Status     -     Yes     Yes    
User Defined Switch Installation Status     -     Yes     Yes    
J1939 Continuous Fault Handling     -    
Remote Torque
Speed Control
Enable Status     -     Yes     Yes    
System Settings     -    
Governor Gain Factor Number 1     -     Yes     Yes    
Governor Minimum Stability Factor Number 1     -     Yes     Yes    
Governor Maximum Stability Factor Number 1     -     Yes     Yes    
FLS     Yes     -     Yes    
FTS     Yes     -     Yes    
Throttle Configuration     -    
Throttle 1     -     Yes     Yes    
Throttle 2     -     Yes     Yes    
Arbitration Method Setup     -     Yes     Yes    
Engine Operating Mode Configuration     -     Yes     Yes    
Synchronize Service Hour Meter     Yes     -     Yes    
Maintenance Indicator     -     Yes     Yes    
Calibrations     -    
Injector Trim Calibration     -     Yes     Yes    
Timing Calibration     -     Yes     Yes    
Current Totals     -    
Total Operating Hours     Yes     -     Yes    
Total Fuel     Yes     -     Yes    
Total Idle Fuel     Yes     -     Yes    
Winflash     -     Yes     Yes    
Security Access Parameters     -    
Total Tattletales     -     Yes     Yes    
Passwords     -    
Customer Password 1     -     Yes     Yes    
Customer Password 2     -     Yes     Yes    Copy ECM Configuration Function in Caterpillar Electronic Technician
Illustration 1 g02358919
Typical example
Select "Service", then "Copy Configuration", then "ECM Replacement" from the menu options. Refer to illustration 1.
Illustration 2 g02358937
Typical example
Click "Cancel" on the pop-up window. Refer to illustration 2.
Illustration 3 g02358963
Typical example
Select "Yes" on the message.
Refer to illustration 3.
Illustration 4 g02358966
Typical example
The message will