FILTER GP-FUEL 3004065 - Caterpillar

Illustration 4 g01418794
Install panel (29) and the bolts.
Illustration 5 g01418793
Install storage box (28) and the bolts.
Illustration 6 g01418792
Install cover (27) and the bolts.
Illustration 7 g01418700
Connect hose assemblies (26) to hydraulic hand control (25).
Illustration 8 g01418699
Install cover (24) and the bolts.
Illustration 9 g01418698
Connect hose (23) and tighten the clamp.
Connect hose (22) and tighten the clamp.
Install spacer (21) and bolt (20) to hose (22).
Illustration 10 g01418697
Install cover (19) and the bolts.
Illustration 11 g01418696
Connect hoses (18) to cab (12).
Illustration 12 g01418695
Connect cable assembly (17) to cab (12) and install the nut.
Connect harness assembly (15) and harness assembly (16) to cab (12).
Illustration 13 g01418694
Install cover (14) and bolts (13).
Illustration 14 g01418693
Install ground strap (11) and the bolt to cab (12).
Illustration 15 g01418692
Install cable assembly (9) and clip (10) to the cab.
Install governor pedal gp (5). Install pin (8) and the cotter pin to cable assembly (9).
Illustration 16 g01418691
Reposition governor pedal gp (5) and install bolts (6).
Connect harness assembly (7).
Illustration 17 g01418690
Reposition hose assembly (3) and hose assemblies (4). Connect hose assembly (3) and hose assemblies (4).
Illustration 18 g01418688
Install cover (2) and the bolts. Lock lock (1).
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual for the correct procedure.
Turn the disconnect switch to the ON position.