FILTER GP-OIL 3467685 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01222336
Remove panel assemblies (1) .
Illustration 2 g01222353
Loosen clamp (3). Disconnect hose (2) .
Illustration 3 g01222373
Remove clamp (4) .
Illustration 4 g01222377
Remove clamp (5). Loosen clamp (7). Disconnect hose (6) .
Illustration 5 g01222385
Disconnect hose (8) .
Illustration 6 g01222388
Illustration 7 g01222392
Remove bolts (9). Remove nuts (10). Remove bracket (11) .
Illustration 8 g01222445
Illustration 9 g01222442
Remove panel assembly (12). Remove bolts (13). Remove panel assembly (14) .
Illustration 10 g01222450
Illustration 11 g01222452
Remove bolts (15). Remove bolts (16). Position fan shroud (17) toward the engine.
Illustration 12 g01222479
Attach Tooling (A) and a suitable lifting device to radiator (18). The weight of radiator (18) is approximately 25 kg (55 lb). Remove bolts (19). Remove radiator (18) .