3601595 FILTER AS-FUEL Caterpillar parts
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20
Rating:
Alternative (cross code) number:
CA3601595
360-1595
3601595
CA3601595
360-1595
3601595
Weight: 0.87 pounds 0 kg.
GENERATOR SET, TRUCK,
Compatible equipment models: 3601595:
For full view, you need register
Information:
Removal Procedure
Start By:
Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install"
Install the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Release the pressure in the air system. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".
Release the pressure from the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Illustration 1 g00524523
Disconnect hose assemblies (2), (3), and (4) from slack adjuster (1).
Illustration 2 g00524526
If necessary, remove elbows (6), (7), and (8) from slack adjuster (1).
Remove bolts (5). Remove slack adjuster (1).
Start By:
Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install"
Install the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Release the pressure in the air system. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".
Release the pressure from the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Illustration 1 g00524523
Disconnect hose assemblies (2), (3), and (4) from slack adjuster (1).
Illustration 2 g00524526
If necessary, remove elbows (6), (7), and (8) from slack adjuster (1).
Remove bolts (5). Remove slack adjuster (1).
Parts filter Caterpillar catalog:
143H, 163H, 163H NA, 24H, 5110B, 5130B, 5230B, 770, 772, 773F, 775F, 777F, 797, 797B, 854G, 993K, D10R, D11R
785C, 793B, 793C, 793D, 797, 797B
785C, 785D, 789, 789B, 789C, 793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B
776D, 777D, 777F, 777G, 784C, 785C, 785D, 789C, 793C, 793D, 797, 797B, D7G, D7G2, D8R II, D8T
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F
770G, 770G OEM, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777F, 777G, 793F, 793F AC, 793F CMD, 793F-XQ, 795F AC, 797F
789D, 797F
789D, 797F
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
C175-16
3512B, 3512C, 3516B, 3516C, C175-16, C175-20, C27, C32, PM3516, TH48-E80, XQC1600
C175-16, C175-20, G3512B, G3512E, G3520B
3512C, C175-16, C175-20, C32, TH48-E80
3512B, 3512C, 3516B, 3516C, C27, C32, G3508, G3508B, G3516, G3516B, G3520B, PM3516
C6.6
C6.6, C7.1
2290, 2390, 2391, 2491, 2590, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 973D, C18, C32, C9, MH3049, MH3059
993K, C15, C18, C27, C32, CX31-C18I, CX35-C18I
657E, 657G, C13, C15, C18, CX31-C18I, CX35-C18I, TH35-C13T