FILTER GP-ENGINE OIL 3637616 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-2352 Support Stand As 2
B 1U-7505 Hydraulic Jack 1
Personal injury or death can occur from heavy components falling during removal or installation.Properly support the component with a suitable lifting device during removal or installation.
Illustration 1 g01359672
Raise blade (1). Install Tooling (A) under blade (1) and lower blade (1) onto Tooling (A).
Illustration 2 g03831880
Remove inner bolts (2) before placing Tooling (B) under counterweight (3).
Illustration 3 g01359686
Install Tooling (B) under counterweight (3). The weight of counterweight (3) is approximately 299 kg (660 lb).
Remove remaining bolts (2). Remove counterweight (3) with the use of Tooling (B). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 422-2352 Support Stand As 2
B 1U-7505 Hydraulic Jack 1
Personal injury or death can result from lifting a heavy component.The heavy component can fall if using an incorrect hoist and/or sling or fastener to lift the load.Be sure the hoist and other devices have the correct lifting capacity to lift a heavy component. The approximate weight of the heavy component is given below.
Illustration 4 g01359686
Install counterweight (3) with the use of Tooling (B). The weight of counterweight (3) is approximately 299 kg (660 lb).
Install bolts (2).
Remove Tooling (B). Install remaining bolts (2).
Illustration 5 g01359672
Raise blade (1). Remove Tooling (A). Lower blade (1) onto ground.