FILTER GP-OIL 3682079 - Caterpillar

Illustration 79 g03049778
Install O-ring seal (26) in cover (25) .
Illustration 80 g03049777
Install cover (25) and bolts (24). Tighten bolts (24) to a torque 4.5 0.5 N m (40 4 lb in).
Install the O-ring seal and plug (23). Tighten plug (23) to a torque of 60 6 N m (44 4 lb ft).
Illustration 81 g03049767
Install solenoid valve (20), retainer (21), and bolt (22). Tighten bolt (22) to a torque of 4.5 0.5 N m (40 4 lb in). Repeat for the remaining solenoid valve.
Illustration 82 g03049766
Install cover (18) and bolts (19). Tighten bolts (19) to a torque of 1 N m (9 lb in).
Illustration 83 g03049765
Install O-ring seals (17) in actuator assembly (15) .
Illustration 84 g03049761
Install O-ring seals (36) on relief valves (32) .
Illustration 85 g03049757
Install actuator assembly (15) and bolts (13). Tighten bolts (13) to a torque of 4.5 0.5 N m (40 4 lb in).
Install relief valves (12). Tighten relief valves (12) to a torque of 70 7 N m (52 5 lb ft).
Install O-ring seals (14) .
Illustration 86 g03049739
Install angle control valve (11) .
Illustration 87 g03011778
Install shuttle valve (10). Tighten shuttle valve (10) to a torque of 20 N m (177 lb in).
Illustration 88 g03011776
Install shuttle valve (9). Tighten shuttle valve (9) to a torque of 20 N m (177 lb in).
Illustration 89 g03011762
Install plugs (8). Tighten plugs (8) to a torque of 20 N m (177 lb in).
Illustration 90 g03011761
Install O-ring seals (7) on solenoid valve (4) .
Illustration 91 g03011701
Install solenoid valve (4), retainer (6), and bolt (5).
Install tube assembly (3) .
Illustration 92 g03049542
Install manifold assembly (2) and nuts (1). Tighten nuts (1) to a torque of 35 4 N m (26 3 lb ft).End By: Install the bank valve.