FILTER & MTG GP-ENGINE OIL 3687675 - Caterpillar

3. Remove pipe (1).4. Loosen clamp (2) that holds the compressor housing to the cartridge. 5. Remove the cotter pin and pin (5). Remove bolts (4) and lifting eye (3). 6. Loosen clamp (9) and remove bolt (7). Remove breather (6) from the valve cover.7. Remove lead (8) for the glow plugs from the valve cover. 8. Put a mark on compressor housing (11) and the cartridge. Loosen clamp (12). Turn the compressor housing up so the valve cover can be removed.9. Remove bolts (13) and valve cover (10).Install Valve Cover
VIEW FROM RIGHT SIDE OF ENGINE1. Put 5H2471 Cement on the face of valve cover (2) and top side of the gasket. Put the gasket and valve cover in position on the cylinder head and install the bolts that hold it in place. Tighten the bolts to a torque of 96 24 lb.in. (10.8 2.7 N m) in the sequence shown in illustration 77083X1.2. Turn compressor housing (1) back to its original position and tighten clamp (3). Tighten the clamp that holds the compressor housing to the cartridge to a torque of 120 10 lb.in. (13.6 1.1 N m). 3. Install lead (5) for the glow plugs on the valve cover. Connect the wires to the glow plugs.4. Put breather (4) in position on the valve cover and install the bolt that holds it in place. Tighten the bolt to a torque of 120 24 lb.in. (13.6 2.7 N m). Tighten the hose clamp. 5. Install lifting eye (6).6. Install pipe (7).7. Install the muffler.8. Fasten a hoist and install the hoods over the engine and transmission.