3I0145 FILTER Caterpillar parts
Rating:
Alternative (cross code) number:
CA3I0145
3I-0145
3I0145
CA3I0145
3I-0145
3I0145
Weight: 0.80 pounds 0 kg.
Cross Reference:
ALLIS-CHALMERS
2097407,
70247060,
AMC
IA391,
BALDWIN
PA1865FN,
CATERPILLAR
3I-0037,
3I-0145,
3I-0388,
3I-0398,
CLEAN FILTERS
MA670,
FORD
86512886,
KOMATSU
115548-H45,
KUBOTA
13348-11180,
15221-11223,
15221-11224,
15222-11220,
15222-11221,
15222-11223,
15222-11224,
15227-11221,
15227-87471,
15227-87481,
15272-11222,
15319-11221,
15321-11011,
15321-11221,
15328-11221,
15501-11080,
15501-11220,
19215-11220,
31562-11080,
51852-110801,
67800-58300,
67841-58300,
68161-43610,
70000-11221,
70000-14557,
70000-14657,
MASSEY FERGUSON
1804507-M91,
MITSUBISHI
1970-034-000,
PURFLUX
A914,
SAME
242490101,
YANMAR
1215-20-12510,
124066-12510,
171022-12530,
521520-12510,
For full view, you need register
Information:
SCR System Inspection
SCR System
Ensure that area around SCR system is clear of flammable materials.
Inspect access panels.
Inspect injector.
Inspect bulkhead fittings.
Ensure that urea and air lines are connected.
Inspect sensors.
Inspect wiring harness.Dosing Control Cabinet
Ensure that filter screens are in place.
Ensure that drains are closed.
Ensure that all lines are connected.
Check for leaking fluids. Ensure all fluids that have leaked are cleaned up and properly disposed of.
Check the A/C power supply.Powering Up the Dosing Cabinet
Turn on both breakers located inside the dosing cabinet. There will be a 5-10 second delay following power-up until a green LED on the outside cabinet door illuminates. A red/green LED on the dosing pump should illuminate. The LED indicates power is on to the unit. Operating in the proper ANALOG mode, the pump displays a steady green light. Turn on the Touch Screen Panel. The control program should automatically boot up on the Touch Panel screen.Air and DEF
Turn on the ball valves for air and DEF flow.
Use the key on the regulator to set air pressure to 482.6 kPa (70 psi). The regulator is located on the lower left and inside the dosing cabinet. To increase air pressure, turn the key clockwise. DEF should be visible in the clear sediment filter located on the DEF line.
SCR System
Ensure that area around SCR system is clear of flammable materials.
Inspect access panels.
Inspect injector.
Inspect bulkhead fittings.
Ensure that urea and air lines are connected.
Inspect sensors.
Inspect wiring harness.Dosing Control Cabinet
Ensure that filter screens are in place.
Ensure that drains are closed.
Ensure that all lines are connected.
Check for leaking fluids. Ensure all fluids that have leaked are cleaned up and properly disposed of.
Check the A/C power supply.Powering Up the Dosing Cabinet
Turn on both breakers located inside the dosing cabinet. There will be a 5-10 second delay following power-up until a green LED on the outside cabinet door illuminates. A red/green LED on the dosing pump should illuminate. The LED indicates power is on to the unit. Operating in the proper ANALOG mode, the pump displays a steady green light. Turn on the Touch Screen Panel. The control program should automatically boot up on the Touch Panel screen.Air and DEF
Turn on the ball valves for air and DEF flow.
Use the key on the regulator to set air pressure to 482.6 kPa (70 psi). The regulator is located on the lower left and inside the dosing cabinet. To increase air pressure, turn the key clockwise. DEF should be visible in the clear sediment filter located on the DEF line.
Parts filter Caterpillar catalog:
3I0144
FILTER
Caterpillar
Caterpillar
3I0143
FILTER
Caterpillar
Caterpillar
3I0142
FILTER
Caterpillar
Caterpillar
3I0141
FILTER
Caterpillar
Caterpillar
3I0140
FILTER
Caterpillar
Caterpillar
3I0139
FILTER
Caterpillar
Caterpillar
3I0151
FILTER
Caterpillar
Caterpillar
Caterpillar
3I0149
FILTER
Caterpillar
Caterpillar
3I0148
FILTER
Caterpillar
Caterpillar
Caterpillar
3I0146
FILTER
Caterpillar
Caterpillar