FILTER 3I0206 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of all maintenance which includes the following items: performing all adjustments , using proper lubricants, fluids, and filters and replacing old components with new components due to normal wear and aging .Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Before each consecutive interval is performed, all maintenance from the previous intervals must be performed.Choose the interval that occurs first in order to determine the correct maintenance interval: fuel consumption , service hours and calendar time . Products that operate in severe operating conditions may require more frequent maintenance. All of the following will affect the oil change interval: operating conditions , fuel type , oil type and size of the oil sump . Scheduled oil sampling analyzes used oil in order to determine if the oil change interval is suitable for your specific engine. Refer to this Operation and Maintenance Manual , "Engine Oil and Filter - Change" in order to determine the oil change interval that is suitable for your specific engine.To determine the maintenance intervals for the overhauls, refer to this Operation and Maintenance Manual , "Maintenance Recommendations" .When Required
Battery - Replace
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
Fuel System - Prime
Maintenance Recommendations
Radiator - Clean
Daily
Control Panel - Inspect/Test
Coolant Level - Check
Engine Air Cleaner Differential Pressure - Check
Engine Air Precleaner - Check/Clean
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel Filter Differential Pressure - Check
Fuel Tank Water and Sediment - Drain
Walk-Around Inspection
Initial 250 Service Hours
Engine Valve Lash - Check
Every 250 Service Hours
Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Hoses and Clamps - Inspect/Replace
Every 400 Service Hours
Engine Valve Lash - Check
Every 500 Service Hours
Engine Oil and Filter - Change
Every 1000 Service Hours
Coolant Sample (Level 2) - Obtain
Engine - Clean
Engine Crankcase Breather - Clean
Engine Protective Devices - Check
Fuel System Primary Filter - Clean/Inspect/Replace
Fuel System Secondary Filter - Replace
Every 2000 Service Hours
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Mounts - Inspect
Turbocharger - Inspect
Every 3000 Service Hours or 3 Years
Coolant (DEAC) - Change
Coolant (ELC) - Change
Coolant Extender (ELC) - Add
Coolant Temperature Regulator - Replace
Every 4000 Service Hours
Engine Valve Lash - Check
Fuel Injector - Inspect/Adjust/Replace
Every 6000 Service Hours or 6 Years
Alternator - Inspect
Coolant (ELC) - Change
Starting Motor - Inspect
Water Pump - Inspect
Overhaul
Overhaul (Major)
Overhaul (Top End)
Overhaul Considerations