FILTER GP-FUEL 4215689 - Caterpillar

Removal Procedure
Start By:
Remove the air inlet manifold. Refer to Disassembly and Assembly, "Air Inlet Manifold - Remove and Install".
Illustration 1 g00912826
Attach a suitable lifting device to exhaust manifold (1).
Illustration 2 g00912827
Disconnect temperature sensor (2) from exhaust manifold (1). Remove bolts (3) in order to remove exhaust manifold (1) and the gaskets. The weight of exhaust manifold (1) is approximately 125 kg (275 lb). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5599 Anti-Seize Compound 1
Illustration 3 g00912826
Apply Tooling (A) to all bearing surfaces of exhaust manifold (1).
Attach a suitable lifting device to exhaust manifold (1) and position exhaust manifold (1) and the gaskets to the engine. The weight of exhaust manifold (1) is approximately 125 kg (275 lb).
Illustration 4 g00912827
Apply Tooling (A) to threads on temperature sensor (2) and the threads on bolts (3).
Install bolts (3). Tighten bolts (3) to a torque of 55 10 N m (40 7 lb ft).
Connect temperature sensor (2) to exhaust manifold (1). Tighten temperature sensor (2) to a torque of 20 3 N m (15 2 lb ft). End By:
Install the air inlet manifold. Refer to Disassembly and Assembly, "Air Inlet Manifold - Remove and Install".