FILTER GP-DIESEL PARTICULATE 4373512 - Caterpillar

Illustration 1 g00701192
Top view
Illustration 2 g00701193
Section A-A
Illustration 3 g00701200
View B-B
Illustration 4 g00701057
Section C-C (1) Torque for the four nuts that are located on the ball studs of the steering linkage ... 2550 100 N m (1881 74 lb ft) (2) 8W-5396 Shim Thickness ... 1.0 mm (0.04 inch)As needed, use shims (2) between the top side of the steering arm and the frame. (3) 177-1737 Shim Pack Total Thickness ... 0.84 mm (0.033 inch)Note: Refer to the Steering System Testing and Adjusting, "Center Arm (Steering) - Adjust" in order to determine the amount of shims to use. (4) Torque for the four nuts that are located on the cylinder pins of the cylinder mounting ... 2550 100 N m (1881 74 lb ft) (5) Shim thicknesses 8D-8573 Shim ... 0.381 mm (0.015 inch) 8D-8574 Shim ... 0.635 mm (0.025 inch)Note: As needed, use shims (5) between the clevis and the shims to provide a maximum clearance of 1.0 mm (0.04 inch). When possible, shims (5) should be added to both sides of the clevis. (6) Taper (7) NutsNote: Use 4C-5593 Anti-Seize Compound in order to lubricate the four ball studs and four cylinder pins. Lubricate taper (6) and the threads of the ball studs and the cylinder pins. Also, lubricate the washer face of the nuts (7) .