4415105 FILTER GP-FUEL Caterpillar parts
Rating:
Alternative (cross code) number:
CA4415105
441-5105
4415105
CA4415105
441-5105
4415105
Weight: 1 pounds 0 kg.
You can buy:
US$73.00
14 Jul 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Filter 2656F823 4415122 4415105 For Forklift Excavator Machinery Engine(FILTER BOWL)
PNTQOKGQX Filters || Fuel Filter 2656F823 4415122 4415105 For Forklift Excavator Machinery Engine
PNTQOKGQX Filters || Fuel Filter 2656F823 4415122 4415105 For Forklift Excavator Machinery Engine
4415105 Fuel Filter Assembly Suitable for Perkins 1103 1104 Series Engines
OfkZynodor Part Name:Fuel Filter Assembly || Part Number:4415105 || Application:Suitable for Perkins 1103 1104 Series Engines || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
OfkZynodor Part Name:Fuel Filter Assembly || Part Number:4415105 || Application:Suitable for Perkins 1103 1104 Series Engines || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
Information:
Removal Procedure
Start By:
Remove the engine oil pan.Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque Values.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Discard all used Connecting Rod fasteners.
Note: If all connecting rod bearings require replacement, the procedure can be carried out on two cylinders at the same time. The procedure can be carried out on the following pairs of cylinders. 1 with 4 and 2 with 3. Ensure that both pairs of the connecting rod bearings are installed before changing from one pair of cylinders to another pair of cylinders. Refer to Disassembly and Assembly, "Connecting Rod Bearings - Install" for the correct procedure.
Illustration 1 g02798265
Remove bolt (2), the O-ring seal, and oil pump screen (1).
Illustration 2 g02798267
The connecting rod and the connecting rod cap should have an etched Number (X) on the side. The number on the connecting rod and the connecting rod cap must match. If necessary, make a temporary mark on the connecting rod and connecting rod cap (4) in order to identify the cylinder number.
Remove bolts (3). Remove connecting rod cap (4) from
Start By:
Remove the engine oil pan.Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque Values.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Discard all used Connecting Rod fasteners.
Note: If all connecting rod bearings require replacement, the procedure can be carried out on two cylinders at the same time. The procedure can be carried out on the following pairs of cylinders. 1 with 4 and 2 with 3. Ensure that both pairs of the connecting rod bearings are installed before changing from one pair of cylinders to another pair of cylinders. Refer to Disassembly and Assembly, "Connecting Rod Bearings - Install" for the correct procedure.
Illustration 1 g02798265
Remove bolt (2), the O-ring seal, and oil pump screen (1).
Illustration 2 g02798267
The connecting rod and the connecting rod cap should have an etched Number (X) on the side. The number on the connecting rod and the connecting rod cap must match. If necessary, make a temporary mark on the connecting rod and connecting rod cap (4) in order to identify the cylinder number.
Remove bolts (3). Remove connecting rod cap (4) from
Caterpillar parts catalog:
Parts filter Caterpillar catalog:
4395563
FILTER GP-ENGINE OIL
Caterpillar
Caterpillar
4395562
FILTER GP-ENGINE OIL
Caterpillar
Caterpillar
4395117
FILTER GP-WATER SEP & FUEL
Caterpillar
Caterpillar
4385223
FILTER GP-FUMES DISPOSAL
Caterpillar
Caterpillar
4378239
FILTER ELEMENT-ENGINE OIL
Caterpillar
Caterpillar
4338066
FILTER
Caterpillar
Caterpillar
4525135
FILTER GP-FUEL
Caterpillar
Caterpillar
4521777
FILTER GP-AIR
Caterpillar
Caterpillar
4519183
FILTER GP-AIR
Caterpillar
Caterpillar
4518589
FILTER GP-ENGINE OIL
Caterpillar
Caterpillar
4480563
FILTER AS-AIR
Caterpillar
Caterpillar
4433666
FILTER ELEMENT-AIR
Caterpillar
Caterpillar