FILTER GP-FUEL 4471944 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1855 Retaining Ring Pliers 1
B 439-3940 Link Bracket 2
C - Loctite 242 -
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g01960358
Disconnect hose assemblies (1), (2), (3), and (4).
Illustration 2 g01188751
Use Tooling (A) in order to remove retaining rings (6).
Remove support (5).
Illustration 3 g01188752
Use two people in order to remove bolts (7) and covers (8).
Illustration 4 g01960369
Disconnect hose assemblies (10), (11), and (12).
Remove fittings (9).
Remove bolts (13).
Illustration 5 g01960386
Remove bolts (15) and retainer (16).
Attach Tooling (B) and a suitable lifting device to swivel (14). The weight of swivel (14) is approximately 125 kg (275 lb). Remove swivel (14). Installation Procedure
Install swivel (14) in the reverse order of removal.
Apply Tooling (C) to the threads of bolts (13) and (15).
Tighten bolts (15) to a torque of 37 4 N m (27 3 lb ft).