FILTER-ENGINE OIL 4621171 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the installation of new components due to normal wear and aging. The performance of this product may be diminished if proper maintenance intervals and procedures are not followed. Components may experience accelerated wear if proper maintenance intervals and procedures are not followed.Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.Before each consecutive interval is performed, all maintenance from the previous intervals must be performed. Refer to this Operation and Maintenance Manual, "Engine Oil and Filter - Change" in order to determine the oil change interval that is suitable for your specific engine.Note: To determine the maintenance intervals for a top end overhaul, a general inspection, or a major overhaul refer to this Operation and Maintenance Manual, "Maintenance Recommendations" .When Required
Batteries - Replace
Battery or Battery Cable - Disconnect
Engine Air Cleaner Element (Dual Element) - Clean/Replace
Engine Air Cleaner Element (Single Element) - Clean/Replace
Fuel System - Prime
Maintenance Recommendations
Radiator - Clean
Daily
Air Starting Motor Lubricator Oil Level - Check
Air Tank Moisture and Sediment - Drain
Cooling System Coolant Level - Check
Driven Equipment - Inspect/Replace/Lubricate
Engine Air Cleaner Differential Pressure - Check
Engine Air Precleaner - Clean
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel System Fuel Filter Differential Pressure - Check
Fuel Tank Water and Sediment - Drain
Instrument Panel - Inspect
Walk-Around Inspection
Initial 250 Service Hours
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Every 250 Service Hours
Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Cooling System Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Hoses and Clamps - Inspect/Replace
Initial 500 Service Hours (or at first oil change)
Magnetic Pickups - Clean/Inspect
Every 500 Service Hours
Air Shutoff - Test
Engine Oil and Filter - Change
Every 1000 Service Hours
Cooling System Coolant Sample (Level 2) - Obtain
Engine - Clean
Engine Crankcase Breather - Clean
Engine Protective Devices - Check
Fuel System Primary Filter - Clean/Inspect/Replace
Fuel System Secondary Filter - Replace
Every 2000 Service Hours
Air Starting Motor Lubricator Bowl - Clean
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Mounts - Check
Turbocharger - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 3 Years
Cooling System Coolant (DEAC) - Change
Cooling System Coolant Extender (ELC) - Add
Every 4000 Service Hours
Engine Valve Lash - Inspect/Adjust
Fuel Injector - Inspect/Adjust
Every 4000 Service Hours or Every Yearly FRA Inspection
Air Shutoff Damper - Remove/Check
Every 6000 Service Hours
Magnetic Pickups - Clean/Inspect
Prelube Pump - Inspect
Every 6000 Service Hours or 6 Years
Alternator - Inspect
Cooling System Coolant (ELC) - Change