FILTER-AIR 4858666 - Caterpillar

Steering Column Tilt and Telescope Control (58)
Tilt - To tilt the steering column, pull up on the lever. Then move the steering column to the desired position. When the lever is released, the steering column will remain in the desired position.Telescope - To telescope the steering column, push down on the lever. Then move the steering column to the desired position. When the lever is released, the steering column will remain in the desired position.Multifunction Switch (59)
Front Window Wiper/Washer
Window Wiper - Rotate the handle away from the operator in order to activate the window wiper. There are six positions for the window wiper.
OFF - When the handle is in the OFF position, the wipers will be off.
INTERMITTENT POSITION - The wipers will operate intermittently.
CONTINUOUS POSITION 1 - The wipers will operate continuously. This is the slow continuous speed.
CONTINUOUS POSITION 2 - The wipers will operate continuously. This is the fast continuous speed.
Window Washer - Push the button at the end of the handle in order to activate the window washer.Dimmer Switch
Dimmer Switch - Push the dimmer switch away from the steering wheel in order to change the headlight beams from low beam to high beam. Also, pull the dimmer switch toward the steering wheel in order to change the headlight beams from high beam to low beam.Directional Turn Signal Control
Right Directional Turn Signal - Push the lever away from the operator in order to activate the right turn signal. When the lever is pushed forward away from the operator, an indicator light will illuminate on the front dash. The right turn signal will flash until the lever is manually returned to the OFF position.OFF - In the OFF position, the directional signal lights will not flash.
Left Directional Turn Signal - Pull the lever toward the operator in order to activate the left turn signal. When the lever is pulled back toward the operator, an indicator light will illuminate on the front dash. The left turn signal will flash until the lever is manually returned to the OFF position.Note: Refer to the “Indicators” topic in Operation and Maintenance Manual, "Monitoring System" for more information about the indicator lights.Fan Speed Control (60)
Fan Speed Switch - The fan speed switch controls the four-speed blower fan motor for heating and for the air conditioner. Turn fan speed switch anywhere between OFF position (left) and MAXIMUM position (right).Temperature Variable Control (61)
Temperature Variable Control - This knob will adjust the temperature of the operator compartment. The knob has a heating side and a cooling side. The heating side has a red marking. When you turn the knob all the way to the right, the heater will provide maximum heat. The cooling side has a blue marking. When you turn the knob all the way to the left, the air conditioner will provide maximum cooling. Position the knob for your comfort.Heating and Air Conditioning Switch (62)
Heating and Air Conditioning Switch - This switch is a three-position switch. The CENTER position of the switch is OFF.