4916075 FILTER GP-OIL Caterpillar parts
Rating:
Alternative (cross code) number:
CA4916075
491-6075
4916075
CA4916075
491-6075
4916075
Weight: 0.88 pounds 0 kg.
You can buy:
US$70.88
29 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
NUEPWRFA 4916075 491-6075 Hydraulic Transmission Filter Compatible for CATERPILLAR 312GX - 340 MHPU, FM528 - FM568, MH3032 - MH3250
NUEPWRFA Part number: 4916075 491-6075 || Compatible for CATERPILLAR 312 GX 313 GC FM 538 315 315 GC FM 558 316 GC 316 GX 317 317 317 GC 317 GC 318 GC 320 320 D 3 320 D 3 GC 320 GC 320 GX 323 D3 323 GC 323 GX 325 326 330 330 333 FM 568 333 GC 335 336 336 GC 336 MHPU 340 340 MHPU FM 528 FM 528 LL FM 538 FM 548 FM 558 FM 568 MH 3032 MH 3040 MH 3050 MH 3250 || New aftermarket parts, the picture is just for reference. Manufactured to OEM standards and rigorously tested at the factory.
NUEPWRFA Part number: 4916075 491-6075 || Compatible for CATERPILLAR 312 GX 313 GC FM 538 315 315 GC FM 558 316 GC 316 GX 317 317 317 GC 317 GC 318 GC 320 320 D 3 320 D 3 GC 320 GC 320 GX 323 D3 323 GC 323 GX 325 326 330 330 333 FM 568 333 GC 335 336 336 GC 336 MHPU 340 340 MHPU FM 528 FM 528 LL FM 538 FM 548 FM 558 FM 568 MH 3032 MH 3040 MH 3050 MH 3250 || New aftermarket parts, the picture is just for reference. Manufactured to OEM standards and rigorously tested at the factory.
C4.4 C7.1 Engine Fuel GP-OIL Compatible with E320GC E330 E323 E313D2GC Excavator Transmission Pumps 491-6075 4916075 Hydraulic Filter Excavator Part
Generic 491-6075 4916075 || C4.4 C7.1 Engine Fuel GP-OIL || Compatible with E320GC E330 E323 E313D2GC Excavator Transmission Pumps 491-6075 4916075 Hydraulic Filter Excavator Part
Generic 491-6075 4916075 || C4.4 C7.1 Engine Fuel GP-OIL || Compatible with E320GC E330 E323 E313D2GC Excavator Transmission Pumps 491-6075 4916075 Hydraulic Filter Excavator Part
fuel filterNUEPWRFA 4916075 491-6075 HYDRAULIC FILTER Compatible for CATERPILLAR 315 336
NUEPWRFA Part number: 4916075 491-6075 || Compatible for CATERPILLAR 315 336 || New aftermarket parts, the picture is just for reference. Manufactured to OEM standards and rigorously tested at the factory.
NUEPWRFA Part number: 4916075 491-6075 || Compatible for CATERPILLAR 315 336 || New aftermarket parts, the picture is just for reference. Manufactured to OEM standards and rigorously tested at the factory.
Number on catalog scheme:
9
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85 mm 1
If the engine is equipped with fan guards, remove the fan guards.
Illustration 1 g01260739
Typical example
Install a suitable square drive tool into Hole (X) in tensioner (3). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y). Release the pressure on the square drive tool.
Remove alternator belt (1). Note: Mark the direction of rotation if the belt will be reused.
From the front of the engine, turn the square drive tool in a clockwise direction. Release the pressure on Tooling (A). Remove Tooling (A) from Hole (Y).
Release the pressure on the square drive tool and remove the tool from Hole (X).
If necessary, follow Step 7.a and Step 7.b in order to remove tensioner (3) from mounting bracket (2).
Remove bolt (4) that secures tensioner (3) to mounting bracket (2).
Remove tensioner (3) from mounting bracket (2). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85 mm 1
Illustration 2 g01270907
Typical example
If the tensioner was previously removed, follow Step 1.a through Step 1.c in order to install the tensioner.
Align the dowel in the back of tensioner (3) with the hole in mounting bracket (2).
Install tensioner (3) to mounting bracket (2).
Install bolt (4). Tighten the bolt to a torque of 45 N m (33 lb ft).
Install a suitable square drive tool into Hole (X) in tensioner (1). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y). Release the pressure on the square drive tool.
Install alternator belt (1). Ensure that the alternator belt is centered on pulley (5). A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the ribs of all pulleys.
From the front of the engine, turn the square drive tool in a clockwise direction. Release the pressure on Tooling (A). Remove Tooling (A) from Hole (Y).
Release the pressure on the square drive tool until the alternator belt is tensioned. Remove the tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine is equipped with fan guards, install the fan guards.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85 mm 1
If the engine is equipped with fan guards, remove the fan guards.
Illustration 1 g01260739
Typical example
Install a suitable square drive tool into Hole (X) in tensioner (3). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y). Release the pressure on the square drive tool.
Remove alternator belt (1). Note: Mark the direction of rotation if the belt will be reused.
From the front of the engine, turn the square drive tool in a clockwise direction. Release the pressure on Tooling (A). Remove Tooling (A) from Hole (Y).
Release the pressure on the square drive tool and remove the tool from Hole (X).
If necessary, follow Step 7.a and Step 7.b in order to remove tensioner (3) from mounting bracket (2).
Remove bolt (4) that secures tensioner (3) to mounting bracket (2).
Remove tensioner (3) from mounting bracket (2). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85 mm 1
Illustration 2 g01270907
Typical example
If the tensioner was previously removed, follow Step 1.a through Step 1.c in order to install the tensioner.
Align the dowel in the back of tensioner (3) with the hole in mounting bracket (2).
Install tensioner (3) to mounting bracket (2).
Install bolt (4). Tighten the bolt to a torque of 45 N m (33 lb ft).
Install a suitable square drive tool into Hole (X) in tensioner (1). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y). Release the pressure on the square drive tool.
Install alternator belt (1). Ensure that the alternator belt is centered on pulley (5). A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the ribs of all pulleys.
From the front of the engine, turn the square drive tool in a clockwise direction. Release the pressure on Tooling (A). Remove Tooling (A) from Hole (Y).
Release the pressure on the square drive tool until the alternator belt is tensioned. Remove the tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine is equipped with fan guards, install the fan guards.
Caterpillar parts catalog:
Parts filter Caterpillar catalog:
Caterpillar
Caterpillar
4883498
FILTER ELEMENT-AIR
Caterpillar
Caterpillar
4879660
FILTER GP-OIL
Caterpillar
Caterpillar
4874163
FILTER & MTG GP-DPF
Caterpillar
Caterpillar
4854600
FILTER ELEMENT AS-OIL
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
4964996
FILTER GP-ENGINE OIL
Caterpillar
Caterpillar
4951507
FILTER GP-DIESEL EXHAUST FLUID
Caterpillar
Caterpillar
4940370
FILTER GP-DIESEL PARTICULATE
Caterpillar
Caterpillar