FILTER-AIR 4993763 - Caterpillar

Illustration 1 g02648616
Table 1
Specifications for 160-2612 Flywheel Housing Gp
Item Qty Part Specification Description
During assembly, front face of the flywheel housing and rear face of the cylinder block must be free of oil, fuel, water, and assembly compounds.
Apply ultra blue Loctite 587 to fill the space between the cylinder block, the flywheel housing, and the oil pan. The components must be assembled within 10 minutes of applying the sealant.
Use the following tightening procedure to tighten the bolts for the flywheel housing:
1 9 7K-6058 Bolt 1. Tighten bolt 1 to bolt 9 in a numerical sequence as shown in Illustration to 100 20 N m (75 15 lb ft).
2. Tighten bolt 10 to bolts 24 in a numerical sequence as shown in Illustration to 40 10 N m (30 7 lb ft)
3. Again, tighten bolt 1 to bolt 9 in a numerical sequence as shown in Illustration to 135 20 N m (100 15 lb ft).
4. Again, tighten bolt 10 to bolts 24 in a numerical sequence as shown in Illustration to 55 10 N m (41 7 lb ft)
2 10 165-3929 Bolt
3 5 165-3933 Bolt
4 3 0S-1566 Bolt Torque to 115 20 N m (85 15 lb ft)