FILTER GP-ENGINE OIL 4N0745 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the air cleaner.
Illustration 1 g01116759
Remove tube assembly (1) and tube assembly (2).
Remove the water hose assemblies, if necessary.
Illustration 2 g01116799
Remove air pipe (3). Remove the O-ring seals from the air pipe.
Loosen clamp (7). Slide the clamp onto elbow coupling (9).
Attach a suitable lifting device to turbocharger (8). The weight of turbocharger (8) is approximately 40 kg (88 lb).
Remove bolts (4) that attach the turbocharger to exhaust manifold (5). Remove turbocharger (8). Remove gasket (6).