FILTER-ELEMENT 5023341 - Caterpillar

Illustration 1 g03160840
Rear view
Illustration 2 g03160841
Right side view
Table 1
Specification for 344-2906 Flywheel Housing Gp    
Item     Qty     Part     Specification Description    
During assembly, the front face of the flywheel housing group and the rear face of the rear housing must be free of oil, fuel, water, assembly compounds, and any other contaminants.    
1     2     3F-6795 Dowel     Protrusion (B) is
6.0 mm (0.24 inch).    
-     2     231-4470 Bolt     Use bolt 1 and bolt 2.
Length of 3/8 inch diameter bolt is
158.75 mm (6.250 inch).    
-     8     231-4471 Bolt     Use bolt 3 to bolt 10.
Length of 1/2 inch diameter bolt is
165.1 mm (6.50 inch).    
-     6     8S-9191 Bolt     Use bolt 11 to bolt 16.
Length of 3/8 inch diameter bolt is
101.6 mm (4.00 inch).    
-     14     1A-5183 Bolt     Use bolt 17, bolt 18, bolt 21 through bolt 30, bolt 32, and bolt 33.
Length of 3/8 inch diameter bolt is
120.65 mm (4.750 inch).    
-     4     5B-9603 Bolt     Use bolt 19, bolt 20, bolt 31, and bolt 34.
Length of 3/8 inch diameter bolt is
127.0 mm (5.00 inch).    
-     2     0S-1619 Bolt     Use bolt 35 and bolt 36.
Length of 3/8 inch diameter bolt is
76.2 mm (3.00 inch).    
-     -     -     Use the following procedure in order to tighten the bolts for the flywheel housing group:
Refer Illustration 1 for bolt tightening sequence.
1. Tighten bolt 1 and bolt 2 in a numerical sequence to
55 10 N m (41 7 lb ft).
2. Tighten bolt 3 through bolt 10 in a numerical sequence to
135 20 N m (100 15 lb ft).
3. Tighten bolt 11 through bolt 36 in a numerical sequence to
47 9 N m (35 7 lb ft).
4. Again, tighten bolt 1 and bolt 2 in a numerical sequence to
55 10 N m (41 7 lb ft)