FILTER & LINES GP-FUEL 5216004 - Caterpillar

5216004 FILTER & LINES GP-FUEL Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5216004
521-6004
5216004

Caterpillar 5216004 FILTER & LINES GP-FUEL

Buy FILTER & LINES GP-FUEL 5216004 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 5216004 Parts scheme FILTER & LINES GP-FUEL

For full view, you need register

Information:

Illustration 106In addition, the "Bearing Adjustment Procedure" in the same referenced Specifications on Final Drive is incorrect. The correct "Bearing Adjustment Procedure" is as follows:
Bearing Adjustment Procedure:
The tool that is required for the bearing adjustment procedure is the 5P-4204 Spanner Wrench.
The procedure that follows must be used to put the correct amount of preload on the bearings for the final drive. The planetary (11) and axle (6) should be removed so that the housing (13) is oriented in the vertical position with the flange down.1. While you tighten nut (7) with the spanner wrench, rotate shaft (12) and hit the hub of sprockets (4).2. Tighten nut (7) to a torque of 12 + 1 N m (100 + 10 lb in) above seal drag. This is required in order to rotate the shaft.3. Back off nut (7) to one locking position and hit the hub of sprockets (4) again.4. \The final torque that is needed to rotate shaft (6) should be 4 + 1 N m (35 + 10 lb in) above the seal drag.