FILTER- 5227283 - Caterpillar

These screed electrical cables are now being routed along the top side of the transverse beam as shown in the following photos. These photos show the routing as it is typically laid out on the 10 foot pavers. The routing on the 8 foot pavers is identical to this, except that the cables are shorter, the 90° connector on the left cable is pointed upward, and the left cable is routed down to the right of the hydraulic hoses instead of around to the left of them. This change became effective with serial numbers 9DN00001, 6YK00001, 1PM00705, 9AL00273, 7HN00001, 8GN00001, 6ZN00181, 4XN00116, 8BM00259, and 6TN00133.
Left Side Cable Routing
Using two P-clips or a large wire tie, secure the cable to the hydraulic hose while assuring that there is enough slack in the paver end of the cable to allow for raising and lowering of the screed.
Right Side Cable Routing
Again, assure that there is enough slack in the paver end of the cable to allow for screed raising and lowering.