FILTER GP- 5362174 - Caterpillar

Illustration 1 g00739291
(1) (12) Torque for plugs ... 102 4 N m (75 3 lb ft) (2) Torque for four bolts ... 34 3 N m (25 2 lb ft) (3) 9T-1699 Spring Length under test force ... 11.10 mm (0.437 inch) Test force ... 32.6 3.1 N (7.3 0.7 lb) Free length after test ... 17.17 mm (0.676 inch) Outside diameter ... 24.89 mm (0.980 inch) (4) Torque for two screws ... 4.0 0.4 N m (35 4 lb in) (5) Torque for three bolts ... 8.5 1.0 N m (75 9 lb in) (6) (7) (8) Torque for bolt ... 91 4 N m (67 3 lb ft) (9) Torque for three plugs ... 12.9 0.1 N m (114 1 lb in) (10) Torque for three bolts ... 91 4 N m (67 3 lb ft) (11) Apply 9S-3263 Thread Lock Compound to the threads. Torque for assembly ... 79 4 N m (58 3 lb ft) (13) As needed, use shims to adjust end play to the following specifications: ... 0.01 - 0.10 mm (0.0004 - 0.0039 inch) (14) 9T-7771 Spring Free length ... 71.2 mm (2.803 inch) Outside diameter ... 52.7 mm (2.075 inch) (15) 100-3409 Bias Spring Free length ... 42 mm (1.65 inch) Diameter ... 141 mm (5.55 inch) (16) Apply 9S-3263 Thread Lock Compound to the threads. Torque for assembly ... 79 4 N m (58 3 lb ft)
Table 1
Test (1) (2)    Output    Engine RPM    Pressure    
Full Speed (3)    
190 L/min (50 US gpm)     1908    
690 kPa (100 psi)    
180 L/min (47.5 US gpm) 1908    
6900 kPa (1000 psi)    
Half Speed (4)    
95 L/min (25 US gpm)     954    
690 kPa (100 psi)    
90 L/min (23.75 US gpm) 954    
6900 kPa (1000 psi)    
( 1 ) Pump rotation is clockwise. View the pump from the shaft end.
( 2 ) Use SAE 10W oil at 65°C (149°F) for any bench test.
( 3 ) Pump at 1800 rpm
( 4 ) Pump at 900 rpm