FILTER 5471860 - Caterpillar

Removal Procedure
Start By:
Remove the storage box and covers.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Illustration 1 g01217534
Remove sheet assembly (1).
Illustration 2 g01302454
Disconnect hose assemblies (2) and (3).
Illustration 3 g01302455
Disconnect harness assemblies (5) and (6). Disconnect harness assemblies (8) from clips (7). Remove bolts (4). Position support assembly (9) and harness assemblies (8) to the side.
Illustration 4 g01302457
Illustration 5 g01302460
Remove ducts (10) and (11). Remove cover (12). Disconnect harness assemblies (15), (16), and (17). Remove bolts (14). Remove heating and air conditioning unit (13).Installation Procedure
Note: Cleanliness is an important factor. Before the installation procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 6 g01302460
Illustration 7 g01302457
Position heating and air conditioning unit (13). Install bolts (14). Tighten bolts (14) to a torque of 22 2 N m (16 2 lb ft). Connect harness assemblies (15), (16), and (17). Install cover (12). Install ducts (10) and (11).
Illustration 8 g01302455
Position support assembly (9) and harness assemblies (8) . Install bolts (4). Connect harness assemblies (8) onto clips (7). Connect harness assemblies (5) and (6).
Illustration 9 g01302454
Connect hose assemblies (2) and (3). Tighten hose assembly (2) to a torque of 10 1 N m (88 9 lb in).
Illustration 10 g01217534
Install sheet assembly (1).
Charge the air conditioner system with refrigerant. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Check the coolant level.End By:
Install the storage box and covers.