FILTER-CAB AIR 5618550 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 2
Be sure that the shaft of the track carrier roller and the bore in the mounting bracket on the undercarriage frame are clean and free of dirt.
Illustration 1 g00365374
Put the track carrier roller in position in the mounting bracket. The track carrier roller weighs approximately 12 kg (26 lb). Adjust the carrier roller until Distance (B), the distance between the outside face of the mounting bracket and the carrier roller is 4.5 0.5 mm (0.18 0.02 inch).
Illustration 2 g00481121
After adjusting the position of the carrier roller in the mounting bracket, tighten bolt (2).
Be sure that the carrier roller rotates smoothly by hand. Slowly lower the track assembly to the carrier roller with Tooling (A).
Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the procedure.