7C1947 FILTER Caterpillar parts
3176, 3176B, 75, 854K, 992K, C27, C32
Rating:
Alternative (cross code) number:
CA7C1947
7C-1947
7C1947
CA7C1947
7C-1947
7C1947
Weight: 0.01 pounds 0 kg.
CHALLENGER, WHEEL LOADER,
Compatible equipment models: 7C1947:
Number on catalog scheme:
10
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench 1 Start By:
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01009468
Use Tooling (A) to remove engine oil filter (3).
Disconnect the tube assembly for the turbocharger inlet (1) from the engine oil filter base (4).
Remove bolts (2) and the washers that hold engine oil filter base (4) to the cylinder block.
Remove engine oil filter base (4) and the gasket.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench 1 Start By:
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01009468
Use Tooling (A) to remove engine oil filter (3).
Disconnect the tube assembly for the turbocharger inlet (1) from the engine oil filter base (4).
Remove bolts (2) and the washers that hold engine oil filter base (4) to the cylinder block.
Remove engine oil filter base (4) and the gasket.
Caterpillar parts catalog:
Parts filter Caterpillar catalog:
214B, 219D, 235, 235C, 3114, 3116, 320 L, 325 LN, 3306, 528, 561D, 627B, 637E, 814B, 815B, 816B, 926A, 936, 950F, 966D, 966F, 966F II, 972G, 973, 973C, CP-563, CS-531C, CS-533C, CS-563C, CS-573C, CS-5...
65, 75, 918F, 924F, 938F, 994, IT18F, IT24F, IT38F
225, 446, 613C II, 621E, 621F, 631E, 637D
416, 428, 436, AP-800, CB-424, CS-323, CS-431B, PR-75
65, AD40, AD45, AE40
3056, 426B
3176, 3176B, 3406B, 3406C, 3406E, 3412, 3508, 3512, 375, 75, 824C, 980C, 980F
3W6886
FILTER
65, 75
65, 75