7T1890 FILTER ELEMENT-CAB AIR Caterpillar parts
D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R
Rating:
Alternative (cross code) number:
CA7T1890
7T-1890
7T1890
CA7T1890
7T-1890
7T1890
Weight: 3 pounds 1 kg.
Information:
EFFECTIVE FILTER AREA
2.5
mm2
LENGTH
665
mm
THICKNESS
72
mm
WIDTH
136
mm
TRACK-TYPE TRACTOR,
Cross Reference:
AVON TYRES
SKL2569,
BALDWIN
PA2844,
CATERPILLAR
7T1890,
DONALDSON
P525026,
FLEETGUARD
AF4731,
LUBERFINER
LAF5026,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 7T1890 Cabin Air Filter for Model D8L, D9L/N/R, D10N, D11/R
CTP For Air Filter || For Model D8L, D9L/N/R, D10N, D11/R || Easy in-and-out fit
CTP For Air Filter || For Model D8L, D9L/N/R, D10N, D11/R || Easy in-and-out fit
Cab Air Filter 7T-1890 7T1890 for Caterpillar 11 10 10SU 10U 11SU 11U 58 58L 59 59L 59N 8 8A 8S 9 9C 9S 9SU 9U D10R D10N D11N D11R D8L D9L D9N D9R D9T
MASBYJX Part Number: 7T-1890 7T1890 || Applicable models: Fit for Caterpillar Track-Type Tractor 11 10 10SU 10U 11SU 11U 58 58L 59 59L 59N 8 8A 8S 9 9C 9S 9SU 9U D10R D10N D11N D11R D8L D9L D9N D9R D9T || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MASBYJX Part Number: 7T-1890 7T1890 || Applicable models: Fit for Caterpillar Track-Type Tractor 11 10 10SU 10U 11SU 11U 58 58L 59 59L 59N 8 8A 8S 9 9C 9S 9SU 9U D10R D10N D11N D11R D8L D9L D9N D9R D9T || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
7T1890 Air filter AF55794 Compatible with Caterpillar - D9N D10R D11R D9R D10N
Taoyitao Packing:1*7T1890 Air filter || Replace: AF55794 || Compatible with:Caterpillar - D9N D10R D11R D9R D10N || Before purchasing: Please check the car model and the size and shape of each component. If you are unsure about the model, please avoid purchasing the wrong product. Please contact us || Manufacturer according to OME standards and specifications
Taoyitao Packing:1*7T1890 Air filter || Replace: AF55794 || Compatible with:Caterpillar - D9N D10R D11R D9R D10N || Before purchasing: Please check the car model and the size and shape of each component. If you are unsure about the model, please avoid purchasing the wrong product. Please contact us || Manufacturer according to OME standards and specifications
Number on catalog scheme:
9
For full view, you need register
Compatible equipment models: 7T1890:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 227-4389 E10 Torx Socket 1
B 934-913 Rocker Assembly Tool 3
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the pushrods. Inspect the pushrods for wear or damage. Replace any pushrods that are worn or damaged.
Apply clean engine lubricating oil to both ends of the pushrods. Install the pushrods to the engine with the cup upward. Note: Ensure that the pushrods are installed in the original location and that the ball end of each pushrod is correctly seated in the valve lifters.
Ensure that the rocker shaft assembly is clean and free from wear or damage.
If the rocker shaft assembly was disassembled, install Tooling (B) between each pair of rocker arms.
Illustration 1 g01359104
Typical example
Illustration 2 g01399882
Typical example
Ensure that the Machined Flat (X) is facing upward, and facing the front end of the engine.
Position rocker shaft assembly (2) onto the cylinder head. Note: Ensure that adjustment screws are properly seated in the ends of pushrods (3).
Illustration 3 g01382368
Typical example
Install torx screws (1) to the rocker shaft assembly finger tight.
Use Tooling (A) to progressively tighten torx screws (1). Begin at the center of the rocker shaft assembly and work toward the ends. Note: To avoid distortion of the rocker shaft assembly, each torx screw should be tightened by a quarter of a turn at one time. Repeat the procedure until all torx screws are tightened.Tighten torx screws (1) to a torque of 35 N m (26 lb ft).
Check the valve lash. Refer to Systems Operation, Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust". If necessary, adjust the valve lash. Refer to Systems Operation, Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust" for the correct procedure. End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 227-4389 E10 Torx Socket 1
B 934-913 Rocker Assembly Tool 3
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the pushrods. Inspect the pushrods for wear or damage. Replace any pushrods that are worn or damaged.
Apply clean engine lubricating oil to both ends of the pushrods. Install the pushrods to the engine with the cup upward. Note: Ensure that the pushrods are installed in the original location and that the ball end of each pushrod is correctly seated in the valve lifters.
Ensure that the rocker shaft assembly is clean and free from wear or damage.
If the rocker shaft assembly was disassembled, install Tooling (B) between each pair of rocker arms.
Illustration 1 g01359104
Typical example
Illustration 2 g01399882
Typical example
Ensure that the Machined Flat (X) is facing upward, and facing the front end of the engine.
Position rocker shaft assembly (2) onto the cylinder head. Note: Ensure that adjustment screws are properly seated in the ends of pushrods (3).
Illustration 3 g01382368
Typical example
Install torx screws (1) to the rocker shaft assembly finger tight.
Use Tooling (A) to progressively tighten torx screws (1). Begin at the center of the rocker shaft assembly and work toward the ends. Note: To avoid distortion of the rocker shaft assembly, each torx screw should be tightened by a quarter of a turn at one time. Repeat the procedure until all torx screws are tightened.Tighten torx screws (1) to a torque of 35 N m (26 lb ft).
Check the valve lash. Refer to Systems Operation, Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust". If necessary, adjust the valve lash. Refer to Systems Operation, Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust" for the correct procedure. End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Caterpillar parts catalog:
Parts filter Caterpillar catalog:
769D, 771D, 773D, 773E, 773F, 775D, 775E, 775F, 776D, 777D, 777F, 844K, 990K, D9R
5130, D9L, PM-565
D10R, D11R, D9R
D10R, D11R, D9R
24H, D10R, D11R, D9R
D10N, D10R, D10T, D11N, D11R, D11T, D9N, D9R, D9T
350, D10N
350, D10N
D8L, D9N, D9R
D10, D11N, D8L, D9L, D9N
1734142
FILTER GP
320C
320C
1785479
FILTER
320C
320C
320 L, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300, E300B, E450, E650, E70, EL240B
1076542
FILTER
320 L
320 L
2373624
FILTER
320C
320C
2623435
FILTER
320C
320C
D10R, D8R, D9R
1Q3363
FILTER GP
D10R, D8R, D9R
D10R, D8R, D9R
D7R, D7R II
24H, D10R, D11R, D9R
D10R, D11R, D9R
D10R, D11R, D9R