1141357 FINAL DRIVE GP Caterpillar parts
320B, 322 FM L, 322B L, 325 L, 325B, 325B L, OEMS
Rating:
Alternative (cross code) number:
CA1141357
114-1357
1141357
CA1141357
114-1357
1141357
EXCAVATOR, UNDERCARRIAGE,
You can buy:
US$7,458.60
14 Jul 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Threetrees 114-1357 1141357 Travel Reduction,Device Fits E325B 325Bl 322B
THREETREES 114-1357 1141357 Travel Reduction,Device Fits E325B 325Bl 322B
THREETREES 114-1357 1141357 Travel Reduction,Device Fits E325B 325Bl 322B
$7,677.60
23 Nov 2023
CN: will be ok
OKwillBE Final Drive Travel Gearbox 114-1357 for Caterpillar CAT Engine 3116
OKwillBE Part Number:114-1357, CA1141357, 1141357 || Application:for Caterpillar CAT Engine 3116
OKwillBE Part Number:114-1357, CA1141357, 1141357 || Application:for Caterpillar CAT Engine 3116
$9.83
24 Oct 2021
IN: AVANI EXCHANGE
60mm Large Spirit Bubble Level Degree Mark Surface Circular Measuring Bulls Eyes
AVANI EXCHANGE Features: Used for adjusting the level of the woodworking tools factory machinery special instrument.Suitable for adjusting the level of PTZ level medical equipment office desktop computer chassis display office machine. || Applicable for adjusting the level of camera tripod furniture toy frame calendar.Available for all high accuracy requirement areas makes adjusting more convenient and accurate. Material: AcrylicSize: App 60 x 12mm (D x H)Weight: App 35g. || Package Included: 1 x Bubble Level Degree Tool.
AVANI EXCHANGE Features: Used for adjusting the level of the woodworking tools factory machinery special instrument.Suitable for adjusting the level of PTZ level medical equipment office desktop computer chassis display office machine. || Applicable for adjusting the level of camera tripod furniture toy frame calendar.Available for all high accuracy requirement areas makes adjusting more convenient and accurate. Material: AcrylicSize: App 60 x 12mm (D x H)Weight: App 35g. || Package Included: 1 x Bubble Level Degree Tool.
This part in 5 request:
Show.
This information for suppliers only!
2019-08-30
2019-02-06
2017-08-16
2016-12-12
2016-07-27
Number on catalog scheme:
1
For full view, you need register
1141357
Images:
Compatible equipment models: 1141357:
Information:
Remove Hydramechanical Shutoff Control
1. Disconnect tube assemblies (2) from diverter valve (3) and disconnect tube assemblies (1) from the shutoff control. 2. Remove the bolts to remove cover (5), tube (4) and the diverter valve as a unit from the shutoff drive housing assembly and the shutoff control. 3. Disconnect tube assemblies (6), (7) and (9) from the shutoff control. Remove the bolts and hydramechanical shutoff control (8) from the shutoff drive housing assembly. 4. Remove coupling (10) from the end of the shutoff drive gear.Install Hydramechanical Shutoff Control
1. Install coupling (2) on the end of the shutoff drive gear.2. Put hydramechanical shutoff control (1) and the gasket in position on the shutoff drive housing assembly. Make sure the shaft of the shutoff control is correctly engaged with the coupling and install the bolts to hold the shutoff control in position. 3. Connect tube assemblies (3), (4) and (5) to the shutoff control. 4. Put clean engine oil on the O-ring seals and install tube (6) in the bottom of the shutoff control. Put cover (7) and the diverter valve as a unit in position on tube (6) and the shutoff drive housing assembly. Install the bolts to hold these in position. 5. Connect tube assemblies (8) to the shutoff control and connect tube assemblies (9) to the diverter valve.Disassemble Hydramechanical Shutoff Control
start by:a. remove hydramechanical shutoff control 1. Remove the bolts and remove actuator valve (1) from the pressure control valve.
There is spring pressure on cover (2).
2. Remove the bolts and remove cover (2) from the actuator valve body. 3. Remove springs (4), spacer (5) and valve assemblies (3) from the valve body. 4. Remove tube assembly (7) from the shutoff control.5. Remove pressure control valve (6) from the shutoff control. 6. Put identification marks on valve assemblies (12) and (13) for assembly purposes. Remove rack shutoff valve (12) and air inlet shutoff valve (13) from the pressure control body assembly. Remove three O-ring seals from each valve.7. Remove plug (11) to remove pilot valve (10) and spring (9) from the pressure control body assembly.8. Remove manual shutoff valve (8) as a unit from the pressure control body assembly. 9. Loosen nut (16) to remove knob (17) and nut (16) from valve (14). Remove adapter (18) and spring (19) from valve (14). Remove O-ring seal (15) from adapter (18). 10. Remove seal (20) from adapter (18). 11. Remove eight bolts (22) to remove gerotor pump group (21) from the shutoff control housing assembly. 12. Use tool (A) to remove ring (24) and the washer from the carrier assembly shaft. Do not remove bolts (23) at this time. 13. Remove carrier assembly (25) from the gerotor pump group. 14. Remove dowels (27) to remove weights (26) from carrier (25). Remove pin (28) and use a press to remove shaft (29) from carrier (25). 15. Remove washer (30) from the pump group. 16. Remove the two bolts (23) to remove cover assembly (31) from the plate. 17. Remove
1. Disconnect tube assemblies (2) from diverter valve (3) and disconnect tube assemblies (1) from the shutoff control. 2. Remove the bolts to remove cover (5), tube (4) and the diverter valve as a unit from the shutoff drive housing assembly and the shutoff control. 3. Disconnect tube assemblies (6), (7) and (9) from the shutoff control. Remove the bolts and hydramechanical shutoff control (8) from the shutoff drive housing assembly. 4. Remove coupling (10) from the end of the shutoff drive gear.Install Hydramechanical Shutoff Control
1. Install coupling (2) on the end of the shutoff drive gear.2. Put hydramechanical shutoff control (1) and the gasket in position on the shutoff drive housing assembly. Make sure the shaft of the shutoff control is correctly engaged with the coupling and install the bolts to hold the shutoff control in position. 3. Connect tube assemblies (3), (4) and (5) to the shutoff control. 4. Put clean engine oil on the O-ring seals and install tube (6) in the bottom of the shutoff control. Put cover (7) and the diverter valve as a unit in position on tube (6) and the shutoff drive housing assembly. Install the bolts to hold these in position. 5. Connect tube assemblies (8) to the shutoff control and connect tube assemblies (9) to the diverter valve.Disassemble Hydramechanical Shutoff Control
start by:a. remove hydramechanical shutoff control 1. Remove the bolts and remove actuator valve (1) from the pressure control valve.
There is spring pressure on cover (2).
2. Remove the bolts and remove cover (2) from the actuator valve body. 3. Remove springs (4), spacer (5) and valve assemblies (3) from the valve body. 4. Remove tube assembly (7) from the shutoff control.5. Remove pressure control valve (6) from the shutoff control. 6. Put identification marks on valve assemblies (12) and (13) for assembly purposes. Remove rack shutoff valve (12) and air inlet shutoff valve (13) from the pressure control body assembly. Remove three O-ring seals from each valve.7. Remove plug (11) to remove pilot valve (10) and spring (9) from the pressure control body assembly.8. Remove manual shutoff valve (8) as a unit from the pressure control body assembly. 9. Loosen nut (16) to remove knob (17) and nut (16) from valve (14). Remove adapter (18) and spring (19) from valve (14). Remove O-ring seal (15) from adapter (18). 10. Remove seal (20) from adapter (18). 11. Remove eight bolts (22) to remove gerotor pump group (21) from the shutoff control housing assembly. 12. Use tool (A) to remove ring (24) and the washer from the carrier assembly shaft. Do not remove bolts (23) at this time. 13. Remove carrier assembly (25) from the gerotor pump group. 14. Remove dowels (27) to remove weights (26) from carrier (25). Remove pin (28) and use a press to remove shaft (29) from carrier (25). 15. Remove washer (30) from the pump group. 16. Remove the two bolts (23) to remove cover assembly (31) from the plate. 17. Remove
Caterpillar SIS machinery equipment:
Caterpillar SIS
CIPI Undercarriages L5E00001-UP (MACHINE) »
114-1357
FINAL DRIVE GP
325, 325L EXCAVATOR 8NK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-1357
FINAL DRIVE GROUP
322 L, 322 LL & 322 FB FOREST SWING MACHINES 9RL00001-UP (MACHINE) POWERED BY 3054 ENGINE »
114-1357
FINAL DRIVE GP
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine »
114-1357
DRIVE GP-FINAL
325B & 325B LN Excavators 6DN00001-UP (MACHINE) POWERED BY 3116 Engine »
114-1357
DRIVE GP-FINAL
322B L Excavator 1YS00001-UP (MACHINE) POWERED BY 3116 Engine »
114-1357
DRIVE GP-FINAL
325B L & 325B LN Excavators 4DS00001-UP (MACHINE) POWERED BY 3116 Engine »
114-1357
DRIVE GP-FINAL
320B, 320B L, 320B LN, 320B N & 320B S Excavators 1XS00001-UP (MACHINE) POWERED BY 3116 Engine »
114-1357
DRIVE GP-FINAL
325B & 325B L TRACK-TYPE EXCAVATORS 8PR00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-1357
FINAL DRIVE GP
325B & 325B L TRACK-TYPE EXCAVATORS 8PR00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-1357
FINAL DRIVE GP
325B L TRACK-TYPE EXCAVATOR /HAMMER ARRANGEMENT/ 1GS00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-1357
FINAL DRIVE GP
325B L TRACK-TYPE EXCAVATOR /HAMMER ARRANGEMENT/ 1GS00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-1357
FINAL DRIVE GP
Caterpillar parts catalog:
Parts final Caterpillar catalog:
318B, 320B, 320B FM LL, 320B L, 320B U, 320N, OEMS
330B, 330B L, OEMS
2043653
FINAL DRIVE GP
330B L, OEMS
330B L, OEMS
2120078
FINAL DRIVE GP
E180, OEMS
E180, OEMS
1C9865
FINAL DRIVE GP
325 L, OEMS
325 L, OEMS
1074898
FINAL DRIVE GP
322 FM L, 325 FM L, 325 L, OEMS
322 FM L, 325 FM L, 325 L, OEMS
8G9622
FINAL DRIVE GP
953, 953B
953, 953B
1912619
FINAL DRIVE GP
312C, 312C L, 314C
312C, 312C L, 314C
1926972
FINAL DRIVE & BRAKE GP
R2900, R2900G, R3000H
R2900, R2900G, R3000H
1695543
FINAL DRIVE GP
330C, 330C L, 345B II, 345B II MH
330C, 330C L, 345B II, 345B II MH
1851912
FINAL DRIVE GP
325 L, OEMS
325 L, OEMS