1977178 FINAL DRIVE GP Caterpillar parts
315C, 315D L
Rating:
Alternative (cross code) number:
CA1977178
197-7178
1977178
CA1977178
197-7178
1977178
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$8,625.50
19 Mar 2020
-: -
Excavator Hydraulic Final Drive Gearbox with Propel Motor | Planetary Gear Hub | Heavy Equipment Machinery Parts | Fits Caterpillar 315DL
HYDRAULIC FINAL DRIVE GEARBOX WITH PROPEL MOTOR | PLANETARY GEAR HUB – This part fits Caterpillar 315DL Excavator. OEM Part Numbers: 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451, || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial provides the most proven after-market components for heavy machinery and equipment in the market. *DISCLAIMER: These are aftermarket parts. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new, after-market options offer even greater value parts and machines are discontinued by manufacturers. || 1 YEAR WARRANTY – RAM Industrial after-market final drives have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $0. Please contact us for instructions regarding return of the core and payment of the core charge.
HYDRAULIC FINAL DRIVE GEARBOX WITH PROPEL MOTOR | PLANETARY GEAR HUB – This part fits Caterpillar 315DL Excavator. OEM Part Numbers: 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451, || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial provides the most proven after-market components for heavy machinery and equipment in the market. *DISCLAIMER: These are aftermarket parts. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new, after-market options offer even greater value parts and machines are discontinued by manufacturers. || 1 YEAR WARRANTY – RAM Industrial after-market final drives have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $0. Please contact us for instructions regarding return of the core and payment of the core charge.
$8,625.50
18 Nov 2019
-: -
RAM Industrial Final Drive Gearbox with Propel Motor | Fits Caterpillar 315D | OEM Part Number 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451,
FINAL DRIVE GEARBOX WITH PROPEL MOTOR – This part fits Caterpillar 315D . OEM Part Numbers: 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451, || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $2500. Please contact us for instructions regarding return of the core and payment of the core charge.
FINAL DRIVE GEARBOX WITH PROPEL MOTOR – This part fits Caterpillar 315D . OEM Part Numbers: 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451, || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $2500. Please contact us for instructions regarding return of the core and payment of the core charge.
$8,625.50
18 Nov 2019
-: -
RAM Industrial Final Drive Gearbox with Propel Motor | Fits Caterpillar 315DL | OEM Part Number 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451,
FINAL DRIVE GEARBOX WITH PROPEL MOTOR – This part fits Caterpillar 315DL. OEM Part Numbers: 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451, || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $0. Please contact us for instructions regarding return of the core and payment of the core charge.
FINAL DRIVE GEARBOX WITH PROPEL MOTOR – This part fits Caterpillar 315DL. OEM Part Numbers: 165-5777,197-7178,199-4505,283-8896,350-0450,350-0451, || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $0. Please contact us for instructions regarding return of the core and payment of the core charge.
Number on catalog scheme:
For full view, you need register
Information:
Drain
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Open the cooling system drain valve (if equipped). If the cooling system is not equipped with a drain valve, remove the cooling system drain plugs.Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Dealer Service Tool Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLFlush
Flush the cooling system with clean water in order to remove any debris.Note: If equipped, be sure to flush the heater and any related supply and return lines.
Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with clean water. Install the cooling system filler cap.
Start and run the engine at low idle until the temperature reaches 49 to 66 °C (120 to 150 °F).
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap. Open the drain valve (if equipped) or remove the cooling system drain plugs. Allow the water to drain. Flush the cooling system with clean water. Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".Fill
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with Extended Life Coolant (ELC). See Special Publication, SEBU6385, "Caterpillar On-highway Diesel Truck Engine Fluids Recommendations" for more information on cooling system specifications. Do not install the cooling system filler cap.
Start and run the engine at low idle for 5 minutes. Then, increase the engine rpm to high idle. Run the engine at high idle for one minute in order to purge the air from the cavities of the engine block.
Check the coolant level. Maintain the coolant level within 13 mm (0.5 inch) below the bottom of the pipe for filling. Maintain the coolant level within 13 mm (0.5 inch) to the proper level on the sight glass (if equipped).
Clean the cooling system filler cap. Inspect the gasket that is on the cooling system filler cap. If the gasket that is on the cooling system filler cap is damaged, discard the
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap.
Open the cooling system drain valve (if equipped). If the cooling system is not equipped with a drain valve, remove the cooling system drain plugs.Allow the coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Dealer Service Tool Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLFlush
Flush the cooling system with clean water in order to remove any debris.Note: If equipped, be sure to flush the heater and any related supply and return lines.
Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with clean water. Install the cooling system filler cap.
Start and run the engine at low idle until the temperature reaches 49 to 66 °C (120 to 150 °F).
Stop the engine and allow the engine to cool. Loosen the cooling system filler cap slowly in order to relieve any pressure. Remove the cooling system filler cap. Open the drain valve (if equipped) or remove the cooling system drain plugs. Allow the water to drain. Flush the cooling system with clean water. Close the drain valve (if equipped). Clean the drain plugs. Install the drain plugs. For the proper torque, refer to the Specifications Manual, SENR3130, "Torque Specifications".Fill
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with Extended Life Coolant (ELC). See Special Publication, SEBU6385, "Caterpillar On-highway Diesel Truck Engine Fluids Recommendations" for more information on cooling system specifications. Do not install the cooling system filler cap.
Start and run the engine at low idle for 5 minutes. Then, increase the engine rpm to high idle. Run the engine at high idle for one minute in order to purge the air from the cavities of the engine block.
Check the coolant level. Maintain the coolant level within 13 mm (0.5 inch) below the bottom of the pipe for filling. Maintain the coolant level within 13 mm (0.5 inch) to the proper level on the sight glass (if equipped).
Clean the cooling system filler cap. Inspect the gasket that is on the cooling system filler cap. If the gasket that is on the cooling system filler cap is damaged, discard the
Caterpillar SIS machinery equipment:
Caterpillar SIS
315C & 315C L Excavators CFB00001-UP (MACHINE) POWERED BY 3046 Engine »
197-7178
DRIVE GP-FINAL
315C L Excavator ANF00001-UP (MACHINE) POWERED BY 3054 Engine »
197-7178
DRIVE GP-FINAL
315C & 315C L Excavators AKE00001-UP (MACHINE) POWERED BY 3046 Engine »
197-7178
DRIVE GP-FINAL
315D L Excavator CJN00001-UP (MACHINE) POWERED BY C4.2 Engine »
197-7178
DRIVE GP-FINAL
315D L Excavator NCM00001-UP (MACHINE) POWERED BY C4.2 Engine »
197-7178
DRIVE GP-FINAL
315D L Excavator BZN00001-UP (MACHINE) POWERED BY C4.2 Engine »
197-7178
DRIVE GP-FINAL
315D L Excavator TLE00001-UP (MACHINE) POWERED BY C4.2 Engine »
197-7178
DRIVE GP-FINAL
Caterpillar parts catalog:
Parts final Caterpillar catalog:
311C, 315C, 315D L, 318D L
330B L
1925380
FINAL DRIVE GP
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
7D4700
FINAL DRIVE AND WHEEL
650B, 666B
650B, 666B
6G9375
FINAL DRIVE GP
785, 785B
785, 785B
330C, 330C L, 330C MH
1090833
FINAL DRIVE GP
322 FM L, OEMS
322 FM L, OEMS