1998303 FINAL DRIVE GP Caterpillar parts
OEMS
Rating:
Alternative (cross code) number:
CA1998303
199-8303
1998303
CA1998303
199-8303
1998303
UNDERCARRIAGE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$249.15
18 Feb 2023
24.0[10.80] Pounds
US: Quality Solutio
New USA! Made High Torque Starter for Minneapolis Moline Tractor 11-302, U-302 W 4-220 1963 1964 1965 1966 White Lift Truck MY-20,25,30,40 1972-1982 4328N-USA 1107332 TS-1097 R1204205 91-01-3975
Gladiator Meets or Exceeds OEM Specifications || One Year Warranty || 100% Computer Load Tested for Reliability || 1.5KW 9 Tooth CW Rotation
Gladiator Meets or Exceeds OEM Specifications || One Year Warranty || 100% Computer Load Tested for Reliability || 1.5KW 9 Tooth CW Rotation
Compatible equipment models: 1998303:
Information:
Removal Procedure
Start By:
Connect the steering frame lock.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03632165
Remove the bolts, the washers, and panel (1). Remove the bolts, the washers, and panel (2).
Illustration 2 g03631578
Disconnect harness assembly (3).
Illustration 3 g03631620
Disconnect cable assembly (4).
Illustration 4 g03631637
Attach a suitable lifting device to electric starting motor (5). The weight of electric starting motor (5) is approximately 18 kg (40 lb).
Illustration 5 g03631764
Remove bolt (6).
Illustration 6 g03632182
Lower crankcase guard (7). Refer to Operation and Maintenance Manual, "Power Guard Control" for the correct lowering procedure.
Illustration 7 g03632276
Remove grease tube assembly (8).
Illustration 8 g03632277
Disconnect ground strap (9).
Illustration 9 g03632361
Remove bolts (10). Use the suitable lifting device in order to lower electric starting motor (5) from the machine. Installation Procedure
Install electric starting motor (5) in the reverse order of removal.
Tighten the nut for ground strap (9) to a torque of 26 4 N m (230 35 lb in).
Tighten the nut for cable assembly (4) to a torque of 26 4 N m (230 35 lb in).
Start By:
Connect the steering frame lock.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03632165
Remove the bolts, the washers, and panel (1). Remove the bolts, the washers, and panel (2).
Illustration 2 g03631578
Disconnect harness assembly (3).
Illustration 3 g03631620
Disconnect cable assembly (4).
Illustration 4 g03631637
Attach a suitable lifting device to electric starting motor (5). The weight of electric starting motor (5) is approximately 18 kg (40 lb).
Illustration 5 g03631764
Remove bolt (6).
Illustration 6 g03632182
Lower crankcase guard (7). Refer to Operation and Maintenance Manual, "Power Guard Control" for the correct lowering procedure.
Illustration 7 g03632276
Remove grease tube assembly (8).
Illustration 8 g03632277
Disconnect ground strap (9).
Illustration 9 g03632361
Remove bolts (10). Use the suitable lifting device in order to lower electric starting motor (5) from the machine. Installation Procedure
Install electric starting motor (5) in the reverse order of removal.
Tighten the nut for ground strap (9) to a torque of 26 4 N m (230 35 lb in).
Tighten the nut for cable assembly (4) to a torque of 26 4 N m (230 35 lb in).
Caterpillar parts catalog:
Parts final Caterpillar catalog:
1141357
FINAL DRIVE GP
320B, 322 FM L, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322 FM L, 322B L, 325 L, 325B, 325B L, OEMS
1141484
FINAL DRIVE GP
318B, 320B, 320B FM LL, 320B L, 320B U, 320N, OEMS
318B, 320B, 320B FM LL, 320B L, 320B U, 320N, OEMS
1141478
FINAL DRIVE GP
330B, 330B L, OEMS
330B, 330B L, OEMS
2120078
FINAL DRIVE GP
E180, OEMS
E180, OEMS
1C9865
FINAL DRIVE GP
325 L, OEMS
325 L, OEMS
1510162
FINAL DRIVE GP
322B L, OEMS
322B L, OEMS