FINAL DRIVE GP 1C7058 - Caterpillar

Illustration 1 g06313446
Top view
Table 1
Item Qty Part Specification Description
1 2 1K-6853 Grease Fitting Torque to 13 4 N m (115 35 lb in).
2 1 149-8220 Pressure Relief Fitting Torque to 13 4 N m (115 35 lb in).
3 2 148-8410 Plug As Torque to 115 to 127 N m (85 to 94 lb ft).
4 1 164-4180 Plug As Torque to 210 to 231 N m (155 to 170 lb ft).
5 48 8T-0666 Bolt Torque to 1000 125 N m (738 92 lb ft).
6 1 105-8705 Cover Before assembly, apply Loctite 5188 between mating surfaces of cover and trunnion support.
7 4 178-2991 Self-Locking Bolt Use the following procedure in order to tighten the bolts:
1. Tighten to 230 40 N m (170 30 lb ft).
2. Turn to an additional angle of 120 10 degrees.
8 16 160-8510 Self-Locking Bolt Use the following procedure in order to tighten the bolts:
1. Tighten to 230 40 N m (170 30 lb ft).
2. Turn to an additional angle of 120 10 degrees.
9 36 6V-3532 Bolt Torque to 520 70 N m (384 52 lb ft).
10 1 173-0562 Drain Assembly Use the following procedure to tighten the drain assembly:
1. Tighten the drain assembly to 160 15 N m (118 11 lb ft).
2. Tighten the plug to 80 7 N m (59 5 lb ft).
3. A pipe with a diameter of 25.4 mm (1.00 inch) is needed to activate the valve for draining oil.
11 1 165-4929 Plug As Torque to 210 to 231 N m (155 to 170 lb ft).
12 1 148-8411 Plug As Torque to 65 10 N m (48 7 lb ft).