FINAL DRIVE AND WHEEL GROUP 1V4851 - Caterpillar

1V4851 FINAL DRIVE AND WHEEL GROUP Caterpillar parts 950

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1V4851
1V-4851
1V4851

Caterpillar 1V4851 FINAL DRIVE AND WHEEL GROUP

Weight: 0.80 pounds 0 kg.

Buy FINAL DRIVE AND WHEEL GROUP 1V4851 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 1V4851:

WHEEL LOADER 950 Caterpillar

Number on catalog scheme:

Caterpillar 1V4851 Parts scheme FINAL DRIVE AND WHEEL GROUP

For full view, you need register

Information:

TYPE="TABLE" @@@-->
Illustration 2 g00775179
(3) Drain plug in the elbow before the water pump on the front of the engine Note: If the engine is equipped with a jacket water heater, a water line will be installed in the location of drain plug (2).
Open the cooling system drain valves (if equipped). If the cooling system is not equipped with drain valves, remove drain plugs (1), (2), and (3). Drain the coolant from the bottom of the jacket water heater (if equipped).Draining the Separate Circuit
Illustration 3 g00760199
(1) Vent plug on the aftercooler A heat exchanger or a radiator is provided by the customer for the separate circuit aftercooler. Each side of the aftercooler has vent plug (1). Remove the vent plugs. Remove the cooling system filler cap and drain the water from the heat exchanger or the radiator.Clean the Cooling System
After the cooling system has been drained, flush the cooling system with clean water in order to remove any debris.
Close the cooling system drain valves