FINAL DRIVE & BRAKE GP 2050754 - Caterpillar

Parts % Labor Hrs%
*******Group 1*******
0-20000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
20001-40000 hrs,
61-72 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 36.0-hour job for Group 1
Miscellaneous expenses of up to $765 are allowed.
Reasonable travel and mileage is allowed.
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-20000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
20001-40000 hrs,
61-72 mo 50.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 36.0-hour job for Group 2
Miscellaneous expenses of up to $765 are allowed.
Reasonable travel and mileage is allowed.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Group Number 1
Review the safety actions in the Operation and Maintenance Manual.
Caution:
Ensure the engine is shut down and steps have been taken to prevent any attempt to start the engine while the camshaft and followers are being replaced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Step 1: Gain access to right hand side Camshaft Covers and Valve