2276187 FINAL DRIVE GP Caterpillar parts
330C, 330C FM, 330C L, 330C MH
Rating:
Alternative (cross code) number:
CA2276187
227-6187
2276187
CA2276187
227-6187
2276187
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$14,375.50
17 Jul 2020
-: -
Excavator Hydraulic Final Drive Gearbox with Propel Motor | Planetary Gear Hub | Heavy Equipment Machinery Parts | Fits Caterpillar 330C
HYDRAULIC FINAL DRIVE GEARBOX WITH PROPEL MOTOR | PLANETARY GEAR HUB – This part fits Caterpillar 330C Excavator. OEM Part Numbers: 199-4578, 199-4746, 227-6104, 227-6187, 227-6195 || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial provides the most proven after-market components for heavy machinery and equipment in the market. *DISCLAIMER: These are aftermarket parts. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new, after-market options offer even greater value parts and machines are discontinued by manufacturers. || 1 YEAR WARRANTY – RAM Industrial after-market final drives have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $3500. Please contact us for instructions regarding return of the core and payment of the core charge.
HYDRAULIC FINAL DRIVE GEARBOX WITH PROPEL MOTOR | PLANETARY GEAR HUB – This part fits Caterpillar 330C Excavator. OEM Part Numbers: 199-4578, 199-4746, 227-6104, 227-6187, 227-6195 || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial provides the most proven after-market components for heavy machinery and equipment in the market. *DISCLAIMER: These are aftermarket parts. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new, after-market options offer even greater value parts and machines are discontinued by manufacturers. || 1 YEAR WARRANTY – RAM Industrial after-market final drives have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $3500. Please contact us for instructions regarding return of the core and payment of the core charge.
$11,443.00
19 Jan 2020
-: -
RAM Industrial Final Drive Gearbox Without Propel Motor | Fits Caterpillar 330CL | OEM Part Number 199-4578, 199-4746, 227-6104, 227-6187, 227-6195
FINAL DRIVE GEARBOX WITHOUT PROPEL MOTOR – This part fits Caterpillar 330CL. OEM Part Numbers: 199-4578, 199-4746, 227-6104, 227-6187, 227-6195 || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $0. Please contact us for instructions regarding return of the core and payment of the core charge.
FINAL DRIVE GEARBOX WITHOUT PROPEL MOTOR – This part fits Caterpillar 330CL. OEM Part Numbers: 199-4578, 199-4746, 227-6104, 227-6187, 227-6195 || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $0. Please contact us for instructions regarding return of the core and payment of the core charge.
$14,375.50
19 Jan 2020
-: -
RAM Industrial Final Drive Gearbox with Propel Motor | Fits Caterpillar 330C | OEM Part Number 199-4578, 199-4746, 227-6104, 227-6187, 227-6195
FINAL DRIVE GEARBOX WITH PROPEL MOTOR – This part fits Caterpillar 330C. OEM Part Numbers: 199-4578, 199-4746, 227-6104, 227-6187, 227-6195 || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $3500. Please contact us for instructions regarding return of the core and payment of the core charge.
FINAL DRIVE GEARBOX WITH PROPEL MOTOR – This part fits Caterpillar 330C. OEM Part Numbers: 199-4578, 199-4746, 227-6104, 227-6187, 227-6195 || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial supplies only the most proven after-market components in the market. *DISCLAIMER: These are aftermarket drives. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new after-market options become even more valuable as parts and machines become discontinued. || 1 YEAR WARRANTY – RAM Industrial after-market products have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $3500. Please contact us for instructions regarding return of the core and payment of the core charge.
For full view, you need register
Information:
Starting Multiple Units
Use the procedure for starting single units in order to start multiple units. Refer to Operation Section, "Single Unit Operation".Paralleling Multiple Units
Units may be paralleled at no load. Units may also be paralleled with units under load. After the initial conditions for start-up are satisfied, verify for the following requirements:
One of the governors can be an isochronous governor. Electronic load sharing governors are an exception.
Generators must have voltage droop compensation or cross current compensation.
Start the unit which will be paralleled.
Turn on the synchronizer lights.
After the engine has run a few minutes, bring the engine up to synchronous speed. This means that the frequency of the incoming unit will be the same frequency as the unit that is on-line. The synchronizing lights will begin to blink. Note: The frequency of the incoming unit should be slightly greater than the line frequency. This will allow the incoming unit to assume some of the load instead of adding to the system load.
By using the governor control, adjust the engine speed until the lights blink very slowly.
The lights are off when the voltages of the two units are in-phase. Very quickly close the breaker while the lights are out.
Use governor controls in order to share kW load between engines.
Generator temperature will be stabilized in approximately 1 hour. After the generator temperature has been stabilized, adjust the voltage droop rheostat of each generator. This adjustment will share the reactive load and thus will limit the circulating currents. Less droop increases the reactive current that is carried by the generator. Adjusting the voltage droop rheostat in a counterclockwise direction will decrease the droop. Adjusting the voltage droop rheostat in a clockwise direction will increase droop. Load Division and Speed Droop (If Equipped)
Once two units have been paralleled, the share of the kW load for each unit is determined by the governor control setting. If two units of the same capacity and the same governor characteristics have the same governor control settings, the units will share the load equally. The total load must not exceed the capacity of the one engine.In order to transfer the load from one engine to another engine, use the following procedure:
Increase the governor speed control of one unit in order to increase the load.
Reduce the governor speed control of the other unit in order to decrease the load on that unit.
Raise the governor speed control or lower the governor speed control of both units in order to change system frequency. Parallel Operation Of Governors
Illustration 2 g00630841
Load Sharing Module (Typical Example)
The generator set load sharing module provides either the droop load sharing or the isochronous load sharing for parallel applications. The load sharing module has a synchronizing parallel module SPM-A input. The module provides the proportional load sharing. More information is available in the System Operation, Testing and Adjusting, SENR6565, "Generator Set Load Sensor and Generator Load Sharing Module".Function of The Engine Governor
This section describes the function of the engine governor in relation to load division between parallel electric sets.It
Use the procedure for starting single units in order to start multiple units. Refer to Operation Section, "Single Unit Operation".Paralleling Multiple Units
Units may be paralleled at no load. Units may also be paralleled with units under load. After the initial conditions for start-up are satisfied, verify for the following requirements:
One of the governors can be an isochronous governor. Electronic load sharing governors are an exception.
Generators must have voltage droop compensation or cross current compensation.
Start the unit which will be paralleled.
Turn on the synchronizer lights.
After the engine has run a few minutes, bring the engine up to synchronous speed. This means that the frequency of the incoming unit will be the same frequency as the unit that is on-line. The synchronizing lights will begin to blink. Note: The frequency of the incoming unit should be slightly greater than the line frequency. This will allow the incoming unit to assume some of the load instead of adding to the system load.
By using the governor control, adjust the engine speed until the lights blink very slowly.
The lights are off when the voltages of the two units are in-phase. Very quickly close the breaker while the lights are out.
Use governor controls in order to share kW load between engines.
Generator temperature will be stabilized in approximately 1 hour. After the generator temperature has been stabilized, adjust the voltage droop rheostat of each generator. This adjustment will share the reactive load and thus will limit the circulating currents. Less droop increases the reactive current that is carried by the generator. Adjusting the voltage droop rheostat in a counterclockwise direction will decrease the droop. Adjusting the voltage droop rheostat in a clockwise direction will increase droop. Load Division and Speed Droop (If Equipped)
Once two units have been paralleled, the share of the kW load for each unit is determined by the governor control setting. If two units of the same capacity and the same governor characteristics have the same governor control settings, the units will share the load equally. The total load must not exceed the capacity of the one engine.In order to transfer the load from one engine to another engine, use the following procedure:
Increase the governor speed control of one unit in order to increase the load.
Reduce the governor speed control of the other unit in order to decrease the load on that unit.
Raise the governor speed control or lower the governor speed control of both units in order to change system frequency. Parallel Operation Of Governors
Illustration 2 g00630841
Load Sharing Module (Typical Example)
The generator set load sharing module provides either the droop load sharing or the isochronous load sharing for parallel applications. The load sharing module has a synchronizing parallel module SPM-A input. The module provides the proportional load sharing. More information is available in the System Operation, Testing and Adjusting, SENR6565, "Generator Set Load Sensor and Generator Load Sharing Module".Function of The Engine Governor
This section describes the function of the engine governor in relation to load division between parallel electric sets.It
Caterpillar SIS machinery equipment:
Caterpillar SIS
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
330C & 330C L Excavators GKX00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
330C L Excavator DKY00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
330C L Excavator CYA00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
330C Hydraulic Material Handler D3C00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
330C L Material Handler MKM00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
330C & 330C L Excavators JCD00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
330C Forest Swing Machine B3M00001-UP (MACHINE) POWERED BY C-9 Engine »
227-6187
DRIVE GP-FINAL
Caterpillar parts catalog:
Parts final Caterpillar catalog:
325C, 330C, 330C FM, 330C L, 330C MH
2408750
FINAL DRIVE GP
330C L, 330D L
330C L, 330D L
328D LCR, 330C L, 330D, 330D L, 330D LN, 330D MH
330C, 330C FM, 330C L, 330C MH
330C, 330C L, 330C MH, 330D
330C, 330C L, 330C MH
1695543
FINAL DRIVE GP
330C, 330C L, 345B II, 345B II MH
330C, 330C L, 345B II, 345B II MH
328D LCR, 330C, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH
1994760
FINAL DRIVE GP
330C L
330C L
328D LCR, 330C L, 330D L
2765399
FINAL DRIVE GP
330C L, 330D L
330C L, 330D L
1925380
FINAL DRIVE GP
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
7D4700
FINAL DRIVE AND WHEEL
650B, 666B
650B, 666B
6G9375
FINAL DRIVE GP
785, 785B
785, 785B
330C, 330C L, 330C MH
1090833
FINAL DRIVE GP
322 FM L, OEMS
322 FM L, OEMS
2799871
FINAL DRIVE GP
1290T, 2491, 532, TK732
1290T, 2491, 532, TK732
7Y0883
FINAL DRIVE GP
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080