2298520 FINAL DRIVE & BRAKE GP Caterpillar parts
963C
Rating:
Alternative (cross code) number:
CA2298520
229-8520
2298520
CA2298520
229-8520
2298520
TRACK LOADER,
Compatible equipment models: 2298520:
Information:
Removal Procedure
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines for installation purposes. Plug all lines. This will help to prevent fluid loss and this helps to keep contaminants from entering the system.
Open the left engine guard.
Illustration 1 g00881041
Remove bolts (1) and plate (2).
Illustration 2 g00881051
Disconnect hose assemblies (3) and (4).
Remove bolts (5) and motor (6).
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines for installation purposes. Plug all lines. This will help to prevent fluid loss and this helps to keep contaminants from entering the system.
Open the left engine guard.
Illustration 1 g00881041
Remove bolts (1) and plate (2).
Illustration 2 g00881051
Disconnect hose assemblies (3) and (4).
Remove bolts (5) and motor (6).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts final Caterpillar catalog:
1994653
FINAL DRIVE GP
385B, 5090B
385B, 5090B
2004977
FINAL DRIVE GP
322C, 322C FM
322C, 322C FM
6DE8037
FINAL DRIVE & BRAKE GP
AD40, AE40
AD40, AE40
1655777
FINAL DRIVE GP
311C, 315C, 315D L, 318D L
311C, 315C, 315D L, 318D L
2966228
FINAL DRIVE GP
325C, 325D MH
325C, 325D MH