FINAL DRIVE GP 3087805 - Caterpillar

3087805 FINAL DRIVE GP Caterpillar parts 314C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3087805
308-7805
3087805

Buy FINAL DRIVE GP 3087805 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Excavator Hydraulic Final Drive Gearbox with Propel Motor | Planetary Gear Hub | Heavy Equipment Machinery Parts | Fits Caterpillar 314C

$4,888.00

02 Apr 2020

-: -

Excavator Hydraulic Final Drive Gearbox with Propel Motor | Planetary Gear Hub | Heavy Equipment Machinery Parts | Fits Caterpillar 314C
HYDRAULIC FINAL DRIVE GEARBOX WITH PROPEL MOTOR | PLANETARY GEAR HUB – This part fits Caterpillar 314C Excavator. OEM Part Numbers: 191-2592, 244-5248, 267-6826, 308-7805, 374-5971 || PROVEN AFTER-MARKET COMPONENTS – RAM Industrial provides the most proven after-market components for heavy machinery and equipment in the market. *DISCLAIMER: These are aftermarket parts. Some fittings may be different sizes or styles due to updated versions. If your old fittings do not work, please contact us and we will send fittings out to you immediately. || REDUCE MAINTENANCE COSTS BY 50 PERCENT – Our quality components reduce customer maintenance costs by up to 50% in comparison to OEM replacement options. These new, after-market options offer even greater value parts and machines are discontinued by manufacturers. || 1 YEAR WARRANTY – RAM Industrial after-market final drives have a 1 year parts only warranty including all of our branded gearboxes and other components. || CORE CHARGE – The listed price of this part includes a core charge of $0. Please contact us for instructions regarding return of the core and payment of the core charge.

Show more prices Caterpillar parts

Number on catalog scheme:

Caterpillar 3087805 Parts scheme FINAL DRIVE GP

For full view, you need register

Compatible equipment models: 3087805:

EXCAVATOR 314C Caterpillar

Information:

Illustration 3 - Terminal Mounting Details
(A) 76 mm (3.0 in) ref. (B) Six 6.35 mm (1/4 in) holes. (C) One 6.35 mm (1/4 in) hole. To mount the terminal strips in the generator enclosure, use the following procedure.1. Choose a suitable location inside the generator enclosure to mount the terminal strips. Make sure that the location of the terminal strips is close enoough to the control panel, so that the control panel wire harness will reach the terminal strips. See Illustration 3 for the suggested mounting layout A or layout B. Leave approximately 3 inches of vertical space between each terminal strip, to allow for routing of the wires. One of the provided marker strips can be used as a guide for more accurately determining the terminal strip locations.2. A marker strip is also used as a template for mounting the terminal strips. Using a marker strip as a template, mark the location of the two mounting holes (B) for each of the three terminal strips.3. Use a 1/4 inch bit to drill all the mounting holes (B) for the terminal strips. Drill one additional 1/4 inch hole (C) for fastening the chassis ground strap to the generator enclosure. This hole should be located near terminal No. 50 of the terminal strips. See Illustration 3. When drilling holes in the generator enclosure, take care to keep metal filings from falling into the generator shell. Do not allow any metal shavings and filings to come in contact with internal generator windings or the permanent magnet.4. At the desired location, mount the 7C-4551 Marker Strip (1) and a 4D-1260 Terminal Strip (2) using two 6V-7978 Machine Screws (4) and two 9S-5937 Locknuts (5). Repeat the same procedure for mounting the 7C-4552 Marker Strip (3) and the 108-2780 Marker Strip (7).5. At previously drilled hole (C), scrape away the paint from around the hole in order to ensure that a good electrical connection is made. At hole (C), attach one end of the 7W-0922 Chassis Ground Strap using one 6V-7978 Machine Screw (4), one 9F-8125 Toothed Lockwasher (9) and one 9S-5937 Locknut (5). Connect the other end of the chassis ground strap to terminal No. 50.6. Install four 5N-5159 Terminal Strip Jumpers. See Illustration 3.Place two jumpers between the three terminals No. 2.Place one jumper between the two terminals No. 50.Place one jumper between terminal No. 4 and terminal No. 5.