FINAL DRIVE & BRAKE GP 3170679 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the engine oil and water pump drive. Refer to Disassembly and Assembly, "Engine Oil and Water Pump Drive - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01254535
Remove O-ring seal (3).
Remove the bolts and washers (2). Remove rear adapter assembly (4) from shaft assembly (1).
Illustration 2 g01254536
Remove O-ring seals (6) and (7) from rear adapter assembly (4).
Use Tooling (A) and a suitable press to remove bearing (5).
Illustration 3 g00590612
Remove bolts (9) from shaft assembly (1). Remove gears (8) and (10) from shaft assembly (1).
Illustration 4 g00590613
Remove O-ring seal (13) from front adapter assembly (12).
Use Tooling (A) and a suitable press to remove bearing (11) from front adapter assembly (12).