4I7330 FINAL DRIVE GP Caterpillar parts
312
Rating:
Alternative (cross code) number:
CA4I7330
4I-7330
4I7330
CA4I7330
4I-7330
4I7330
Weight: 244 pounds 110 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
4I7330 Hydraulic Final Drive Motor
Generic Machinery Parts || Heavy Equipment Parts || Spare Parts
Generic Machinery Parts || Heavy Equipment Parts || Spare Parts
4I-7330 Hydraulic Final Drive Motor
Generic Machinery Parts || Heavy Equipment Parts || Spare Parts
Generic Machinery Parts || Heavy Equipment Parts || Spare Parts
For full view, you need register
Compatible equipment models: 4I7330:
Information:
Introduction
In 1996, the EPA Emission Regulations began requiring engines to be equipped with some type of tamper resistant device. All 3116 Engines that have mechanical unit injection will be equipped with tamper resistant plugs in the governor housing. The tamper resistant plug will prevent unauthorized changes to the FRC.Tamper Resistant Plugs
The 3116 Engines have two sizes of tamper resistant plugs that are being used. Figure 1 shows the typical location of a 128-4786 Plug that has 7/8 inch threads. Figure 2 shows the typical location of a 128-4794 Plug that has 1 5/8 inch threads.If an adjustment is required on a 3116 Engine that is equipped with a tamper resistant plug, a 131-5009 Wrench is required to remove the plug.
Illustration 1 g00617938
(1) Typical location of 128-4786 Plug
Illustration 2 g00617940
(2) Typical location of 128-4794 Plug
In 1996, the EPA Emission Regulations began requiring engines to be equipped with some type of tamper resistant device. All 3116 Engines that have mechanical unit injection will be equipped with tamper resistant plugs in the governor housing. The tamper resistant plug will prevent unauthorized changes to the FRC.Tamper Resistant Plugs
The 3116 Engines have two sizes of tamper resistant plugs that are being used. Figure 1 shows the typical location of a 128-4786 Plug that has 7/8 inch threads. Figure 2 shows the typical location of a 128-4794 Plug that has 1 5/8 inch threads.If an adjustment is required on a 3116 Engine that is equipped with a tamper resistant plug, a 131-5009 Wrench is required to remove the plug.
Illustration 1 g00617938
(1) Typical location of 128-4786 Plug
Illustration 2 g00617940
(2) Typical location of 128-4794 Plug
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts final Caterpillar catalog:
1026433
FINAL DRIVE GP
311, 312, 315, 317, OEMS
311, 312, 315, 317, OEMS
311, 311B, 312, 315, 317, OEMS
312, 312B L
312, 312B L
330, 330 FM L, 330 L
330, 330 FM L, 330 L
330, 330 FM L, 330 L
1090835
FINAL DRIVE GP
322 FM L
322 FM L
1140281
FINAL DRIVE GP
322 FM L
322 FM L
312, 312B L
312, 312B L