FINAL DRIVE GP 8Y0230 - Caterpillar

8Y0230 FINAL DRIVE GP Caterpillar parts 931C, 931C II, D3C, D3C II

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8Y0230
8Y-0230
8Y0230

Weight: 0.60 pounds 0 kg.

Buy FINAL DRIVE GP 8Y0230 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER, TRACK-TYPE TRACTOR,

This part in 2 request: Show. This information for suppliers only!

#1273497 8Y0230

2024-01-19

#1273492 8Y0230

2024-01-19

Compatible equipment models: 8Y0230:

TRACK LOADER 931C 931C II

TRACK-TYPE TRACTOR D3C D3C II Caterpillar

Number on catalog scheme:

Caterpillar 8Y0230 Parts scheme FINAL DRIVE GP

For full view, you need register

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-0529 Handle 1
1P-0468 Drive Plate 1
1P-0465 Drive Plate 1
C 1P-0462 Drive Plate 1
1P-0461 Drive Plate 1
1P-0529 Handle 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01940294
Illustration 2 g01940736
Use Tooling (C) in order to install bearings (18) in pump body (8) according to the following specifications:
Place bearings (18) in position on the inside of pump body (8) with the chamfer on the bearings toward the outside of the pump body.
Ensure that the joints in the bearings are at an angle of 30° 15° from the center line through the bearing bores. Ensure that the joints are toward the outlet passage of the pump.
The outlet passage has a cavity between the bearing bores.
Illustration 3 g01940293
Illustration 4 g00480381
Use Tooling (C) in order to install bearings (17) in cover (11) according to the following specifications:
Place bearings (17) in position on the inside of cover (11) with the chamfer on the bearings toward the outside of the cover.
Ensure that the joints in the bearings are at an angle of 30° 15° from the centerline through the bearing bores. Ensure that the joints are toward the outlet passage of the pump.
The outlet passage has a cavity between the bearing bores.
Check the condition and the specifications of all the parts of the engine oil pump before you assemble the engine oil pump.
Apply clean engine oil to all of the parts of the engine oil pump.
Illustration 5 g01939558
Install pressure relief valve (13) and bolt (14).
Install shaft assembly (10) and shaft assembly (9) in pump body (8).
Install O-ring seal (15), cover (11), bolt (12), and bolts (16) in pump body (8).
Illustration 6 g01939557
Install drive gear (5) on the shaft.
Install washer (6) and bolt (7) on drive gear (5).
Use Tooling (B) in order to install the bearing in idler gear (4). Ensure that the bearing is even with the outside surface of idler gear (4).
Install idler gear (4).
Illustration 7 g01939556
Install suction bell (3), locknut (1), and bolts (2). Note: Before you install the engine oil pump, lubricant must be in the oil pump and the oil pump must turn freely.End By:
Install the engine oil pump.