5V4311 FINGER Caterpillar parts
815B
Rating:
Alternative (cross code) number:
CA5V4311
5V-4311
5V4311
CA5V4311
5V-4311
5V4311
Weight: 21 pounds 9 kg.
SOIL COMPACTOR,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
Scarifier Shank fits Caterpillar 5V4311
Parts ASAP Replaces Caterpillar Mfg Number(s) 5V4311 || Machine Type: Compactor || Sub-Series: Scarifier Shank || Caterpillar style finger shank
Parts ASAP Replaces Caterpillar Mfg Number(s) 5V4311 || Machine Type: Compactor || Sub-Series: Scarifier Shank || Caterpillar style finger shank
CTP 5V4311 Cleaner Bar Finger for 815B Wheel Loader
CTP For 815B Wheel Loader || Sold in each || Easy in-and-out fit || Country of origin: United States
CTP For 815B Wheel Loader || Sold in each || Easy in-and-out fit || Country of origin: United States
Number on catalog scheme:
5
For full view, you need register
Compatible equipment models: 5V4311:
Caterpillar parts catalog:
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear or damage. Refer to Specifications, "Rocker Shaft" for more information. If necessary, replace any components that are worn or damaged.
Illustration 1 g01417114
If necessary, install nuts (10) and adjusters (9) to rocker arm assemblies (3) and (4). If the original adjusters are reused, ensure that the adjusters are installed in the original positions.
Illustration 2 g01340048
Install retaining clip (7) and spring (8) to the front end of rocker shaft (5).
Lubricate the bores of rocker arm assemblies (3) and (4) and rocker shaft (5) with clean engine oil.
Install rocker arm assembly (3) for number 1 inlet valve to the rocker shaft. Install rocker arm assembly (4) for number 1 exhaust valve to rocker shaft (5). Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve. Used components should be installed in the original location.
If necessary, ensure that locator (2) is correctly seated in pedestal (1). Ensure that the counterbores for the holes in rocker shaft (5) are upward. Align locator (2) with the hole to the front of rocker shaft (5). Install the pedestal to the rocker shaft.
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (6) to rocker shaft (5).
Repeat Steps 5 to 7 in order to assemble the remaining components to rocker shaft (5). End By:
Install the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are clean and free from wear or damage. Refer to Specifications, "Rocker Shaft" for more information. If necessary, replace any components that are worn or damaged.
Illustration 1 g01417114
If necessary, install nuts (10) and adjusters (9) to rocker arm assemblies (3) and (4). If the original adjusters are reused, ensure that the adjusters are installed in the original positions.
Illustration 2 g01340048
Install retaining clip (7) and spring (8) to the front end of rocker shaft (5).
Lubricate the bores of rocker arm assemblies (3) and (4) and rocker shaft (5) with clean engine oil.
Install rocker arm assembly (3) for number 1 inlet valve to the rocker shaft. Install rocker arm assembly (4) for number 1 exhaust valve to rocker shaft (5). Note: The rocker arm assembly for the inlet valve is longer than the rocker arm assembly for the exhaust valve. Used components should be installed in the original location.
If necessary, ensure that locator (2) is correctly seated in pedestal (1). Ensure that the counterbores for the holes in rocker shaft (5) are upward. Align locator (2) with the hole to the front of rocker shaft (5). Install the pedestal to the rocker shaft.
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (6) to rocker shaft (5).
Repeat Steps 5 to 7 in order to assemble the remaining components to rocker shaft (5). End By:
Install the rocker shaft assembly. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Parts finger Caterpillar catalog:
1865878
FINGER AS
740, D400E II
740, D400E II
1716074
FINGER AS
D400E II
D400E II
1532925
FINGER AS
938G, 950G, 962G, IT38G
938G, 950G, 962G, IT38G
1532747
FINGER AS
938G, 950G, 962G, IT38G
938G, 950G, 962G, IT38G
1532745
FINGER AS
938G, 950G, 962G, IT38G
938G, 950G, 962G, IT38G
0778779
FINGER
Caterpillar
Caterpillar
0632679
FINGER PULL
Caterpillar
Caterpillar
0615253
FINGER
Caterpillar
Caterpillar
7K8472
FINGER ASSEM.
815, 824B, 834
815, 824B, 834
825C, 825G, 825G II, 825H, 825K