FITTING-ELBOW 1573344 - Caterpillar

1. Install a hoist on stabilizer rod (2). Remove bolts (1), washers and pin that hold stabilizer rod (2) in position. Remove the stabilizer rod. The weight is 54 kg (120 lb). 2. Remove rings (3) that hold bearings (4) in position in the rod. 3. Use a press and tooling (A) to remove the bearings from the rod.4. Use a press and tooling (A) to install bearings (4) in stabilizer rod (2). 5. Install rings (3) that hold the bearings in position.6. Use a hoist to put the stabilizer bar in position.7. Install the pins, washers and bolts that hold the bar in position.