FITTING 1F3628 - Caterpillar

2. Remove tie wrap (2). Disconnect two electrical connectors (3).3. For Installation purposes, put identification marks on two hose assemblies (1). Disconnect two hose assemblies (1) from the governor actuator. Put plugs in the ends of the hose assemblies to prevent fuel loss and to keep contaminants out of the fuel system. 4. Remove cotter pin (4) that holds the rod end (6) in plate assembly (5). 5. Remove two socket head bolts (7). Remove governor actuator (8) from the engine. The following steps are for the installation of the governor control group.6. Install the governor control group in the reverse order of removal.