AVSPARE.COM
parts catalog

FITTING-BANJO 1Q3286 - Caterpillar


1Q3286 FITTING-BANJO Caterpillar parts
Rating:
21
Alternative (cross code) number:
CA1Q3286
1Q-3286
1Q3286
Caterpillar 1Q3286 FITTING-BANJO
Weight: 2 pounds 1 kg.

Buy FITTING-BANJO 1Q3286 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG2500, "Air Conditioning Tools" for the correct tools.
Illustration 3 g01398859
Open side door (3).
Illustration 4 g01398860
Disconnect six hose assemblies (4). Disconnect eight hose assemblies (5). Disconnect ten hose assemblies (6).
Illustration 5 g01398861
Disconnect hose assemblies (7) and (8) for the air conditioning system. Disconnect hoses (9) and (10). Disconnect hose (11) for the windshield washer.
Illustration 6 g01398862
Disconnect harness assembly (12) for the lower wiper motor.
Illustration 7 g01398864
Disconnect harness assemblies (13) and (15). Disconnect ground strap (14). Remove clip (16).
Illustration 8 g01398865
Disconnect harness assembly (17). Remove all necessary cable straps (18) in order to free harness assembly (17).
Illustration 9 g01390779
Disconnect hose assembly (20) and remove fitting (19). Repeat for the other side.
Disconnect hose assemblies (21) and (22).
Illustration 10 g01390783
Remove rubber cover (23).
Illustration 11 g01390804
Remove bolts (25) and pedal (24).
Illustration 12 g01390810
Remove bolts (26) and reposition pilot valve (27).
Illustration 13 g01390813
Attach Tooling (B) and a suitable lifting device to cab (28). The weight of cab (28) is approximately 1500 kg (3300 lb). The front left chain length should be approximately 1752 mm (69.0 inch). The front right chain length should be approximately 1778 mm (70.0 inch). The rear left chain length should be approximately 2108 mm (83.0 inch). The right rear chain length should be approximately 2133 mm (84.0 inch).
Illustration 14 g01390826
Front side of cab
Remove pin (29) and bolt (230). Repeat for the other side.
Illustration 15 g01390853
Rear side of cab
Remove pins (31) and bolt (32).
Illustration 16 g01390857
Use the suitable lifting device in order to remove cab (28).


Parts fitting Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.