FITTING AS - 2530434 - Caterpillar

Illustration 57 g06281608
Service Lights
(132) 455-8660 Flood Lamp Gp
Install the Service lamps (132) onto the machine in locations shown above using the hardware provided with the lamps.
Position lamps as shown in a direction that provides best visibility to the operator.
Illustration 58 g06281611
(124) 524-5463 Lighting Harness As
(128) 338-1132 Warning Beacon Lamp Gp
Install beacon (128) and harness (124).Antenna
Illustration 59 g06281959
(133) 9W-3072 Antenna As
Install antenna (133) on the cab roof.Window Guard
Illustration 60 g06290533
(134) 8T-4196 Bolt
(135) 8T-4121 Hard Washer
Install window guard using four bolts (134) and four washers (135).Cab Roof Harness Routing
Illustration 61 g06291105
(136) 8C-7332 Edge Trim
(138) 352-3964 Clip
(139) 352-3965 Clip
(142) 132-5789 Clip
Install clips (138), (139), and (142) as shown using the existing hardware.
Fasten cab roof harness to clips with supplied cable straps.
Install edge trim (136) as shown.
Illustration 62 g06291110
(140) 352-3966 Clip
(141) 4P-8134 Clip
Install clips (140) and (141) as shown using the existing hardware.
Fasten cab roof harness to clips with supplied cable straps.
Illustration 63 g06291113
(136) 8C-7332 Edge Trim
(141) 4P-8134 Clip
Install clip (141) as shown using the existing hardware.
Install edge trim (136) as shown.
Fasten cab roof harness to clip with supplied cable straps.Pipe Catcher Arms (If Equipped)
Illustration 64 g06291119
(144) 8T-5460 Bolt
(145) 8T-4123 Washer
(148) 513-1301 Plate As
Install plate (148) using six bolts (144) and six washers (145).
Illustration 65 g06291121
(146) 7X-2553 Bolt
(147) 6V-4316 Hard Washer
(149) 513-1299 Plate As
Install plate (149) using four bolts (146) and four washers (147).Commissioning
Disable Shipping Mode in CAT ET
Check fluids
Ensure that no fluid leaks are present
Set up operating parameters in the monitor
Operate all functions of the machine to ensure proper function