FITTING 3B9003 - Caterpillar

Illustration 1 g02379158
Left side view (1) Solenoid 1 for the high-pressure fuel pump (2) Solenoid 2 for the high-pressure fuel pump (3) Intake manifold pressure sensor (4) Fuel rail pressure sensor (5) Atmospheric pressure sensor (6) Charge air cooler outlet temperature sensor (7) Temperature sensor (NRS) (8) NRS differential pressure sensor (9) NRS intake pressure sensor (10) Electronic Control Module (ECM) (11) Oil pressure sensor (12) Crankcase pressure sensor (13) Fuel pressure sensor (secondary filter outlet) (14) Fuel pressure sensor (secondary filter inlet) (15) Fuel temperature sensor (16) Primary speed/timing sensor (17) Secondary speed/timing sensor
Illustration 2 g02379177
Right side view (18) Coolant temperature sensorThe electronic control system is designed into the engine fuel system and the engine air inlet and exhaust system. Allowing the electronic control system full control over the fuel delivery and the injection timing. The electronic control system provides improved timing control and fuel air ratio control in comparison to conventional mechanical engines. Injection timing is achieved by the precise control of the injector firing time. Engine rpm is controlled by adjusting the injection duration. The Engine Control Module (ECM) energizes the unit injector solenoids in order to start the injection of fuel. Also, the ECM de-energizes the unit injector solenoids in order to stop the injection of fuel. Refer to Systems Operation, "Fuel System" for a complete explanation of the fuel injection process.The engine uses the following three types of electronic components:
Input component
Control component
Output componentAn input component is one that sends an electrical signal to the ECM of the system. The signal that is sent varies in either of the following ways:
Voltage
Frequency
Pulse widthThe variation of the signal is in response to a change in some specific system of the vehicle. Some specific examples of an input component are the engine speed-timing sensors, the coolant temperature sensor, and the cruise control switches. The ECM interprets the signal from the input component as information about the condition, environment, or operation of the vehicle.A control component (ECM) receives the input signals from the input components. Electronic circuits inside the control component evaluate the signals from the input components. These electronic circuits also supply electrical energy to the output components of the system. The electrical energy that is supplied to the output components is based on predetermined combinations of input signal values.An output component is one that is operated by a control module. The output component receives electrical energy from the control group. The output component uses that electrical energy in one of two ways. The output component can use that electrical energy in order to perform work. The output component can use that electrical energy in order to provide information.As an example, a moving solenoid plunger will perform work. By performing work, the component has functioned in order to regulate the vehicle.As an example, a dash panel light or an alarm will provide information to the operator of the vehicle.These electronic components provide the electronic control of the engine operation. Engines with electronic controls offer the following advantages:
Improvement in performance
Improvement