FITTING AS 4264047 - Caterpillar

Illustration 11 g02152972
Install tube (26). Tighten hose clamps (25) and (27) to a torque of 7.5 1.0 N m (66.38 8.85 lb in).
Illustration 12 g02152966
Connect pump assembly (22) to bracket (24). Connect harness assembly (23).
Illustration 13 g02152951
Connect harness assembly (21).
Illustration 14 g02152836
Connect hose clamps (20). Connect hose assemblies (19), (18), and (17) to the tube assemblies.
Illustration 15 g02152822
Connect hose assemblies (16) and (15) to the tube assembly.
Illustration 16 g02152811
Install grill assembly (14).
Illustration 17 g02152776
Illustration 18 g02152764
Attach Tooling (A) and a suitable lifting device to panel assembly (13). The combined weight of the stacks and panel assembly (13) is approximately 68 kg (150 lb). Use Tooling (A) and the suitable lifting device in order to install panel assembly (13). Remove Tooling (A) and install bolts (12).
Illustration 19 g02152744
Attach Tooling (A) and a suitable lifting device to panel assembly (11). The weight of panel assembly (11) is approximately 44 kg (97 lb). Use Tooling (A) and the suitable lifting device in order to install panel assembly (11).
Illustration 20 g02152722
Connect harness assembly clip (10) and check valve (9). Repeat this step for the opposite side of the machine.
Illustration 21 g02152662
Install baffles (8).
Illustration 22 g02152646
Position pre-cleaner (5). Position and tighten hose clamp (7) to a torque of 4.5 1.0 N m (39.83 8.85 lb in). Position and tighten hose clamp (6) to a torque of 4.5 1.0 N m (39.83 8.85 lb in). Repeat this step for the remaining pre-cleaner.
Illustration 23 g02152599
Use two people in order to install panel assembly (4). Repeat this step for the opposite side of the machine.
Illustration 24 g02152594
Install panel assembly (1).
Use two people in order to install grill assembly (3). The weight of grill assembly (3) is approximately 30 kg (66 lb).
Use two people in order to install door assembly (2). The weight of door assembly (2) is approximately 34 kg (75 lb).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper filling procedure. End By:
Install the refrigerant condenser.
Install the fuel cooler.
Install the steering oil cooler.