FITTING- 4827581 - Caterpillar

Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2006". This machine normally has a front mounted bucket or another work tool for the principal intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock or gravel. Additional work tools allow this machine to perform other specific tasks.Application/Configuration Restrictions
Refer to Operation and Maintenance Manual, "Machine Data" below for information about maximum machine weight.Refer to Operation and Maintenance Manual, "Caterpillar Approved Work Tools" for information about acceptable work tools.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.The maximum fore and aft slope for proper lubrication is 25 degrees continuous and 35 degrees intermittent.Note: Intermittent time is defined as two minutes or less.This machine is approved for use in environments with no explosive gases.Machine Data
Illustration 1 g00915025
Basic machine specifications with a General Purpose Bucket are listed below. The machine is 10 percent full of fuel. The machine is equipped with the following options.
Implements
Enclosed ROPS Cab
20.5-25R25 L3 XHA tires
Optional counterweight
Guards
Axles with Limited Slip
Heavy-duty rear axle
Roading Fenders
Ride Control
Secondary SteeringThe weight does not include the operator or other attachments. The weight can change with the configuration of the machine.
Table 1
924Hz Wheel Loader and 172-8568 General Purpose Bucket    
Shipping Weight     10739 kg (23675 lb)    
Maximum Length (B)    
6898 mm (272 inches)    
Width Across Tires    
2492 mm (98 inches)    
Height to Top of ROPS (A)    
3227 mm (127 inches)    
Table 2
924H Wheel Loader and 167-3966 General Purpose Bucket    
Shipping Weight    
11272 kg (24850 lb)    
Maximum Length (B)    
7147 mm (281 inches)    
Width Across Tires    
2492 mm (98 inches)    
Height to Top of ROPS (A)    
3227 mm (127 inches)    
Table 3
928H Wheel Loader and 119-1799 General Purpose Bucket    
Shipping Weight    
12335 kg (27194 lb)    
Maximum Length (B)    
7252 mm (286 inches)    
Width Across Tires (1)    
2470 mm (97 inches)    
Height to Top of ROPS (A)    
3269 mm (129 inches)    
( 1 ) Width will be 100 mm (4 inches) more for machines that are not EU certified.
Table 4
930H Wheel Loader and 256-8889 General Purpose Bucket    
Shipping Weight    
12885 kg (28407 lb)    
Maximum Length (B)    
7601 mm (299 inch)    
Width Across Tires (1)    
2470 mm (97 inches)    
Height to Top of ROPS (A)    
3278 mm (129 inch)    
( 1 ) Width will be 100 mm (4 inches) more for machines that are not EU certified.