FITTING & BUSHING GP-TRUNION 5088908 - Caterpillar

Removal Procedure
Turn the battery disconnect switch to the OFF position.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03342589
Remove nuts (1) from bus bar (2).
Remove bus bar (2) from glow plugs (3).
Remove glow plugs (3) from the cylinder head.Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the threads of the glow plugs are clean and free from damage. Replace any damaged glow plugs.
Illustration 2 g03342589
Install glow plugs (3) into the cylinder head.
For C1.5 and C2.2 engines, tighten the glow plugs to a torque of 23 N m (204 lb in).
Position bus bar (2) onto glow plugs (3).
Install nuts (1) to glow plugs (3). Use Tooling (A) to tighten the nuts to a torque of 1.2 N m (10.6 lb in).
Turn the battery disconnect switch to the ON position.