FITTING 5438229 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8S-2254     Puller Group     1    
8T-0292 Bolt     3    Start By:
Remove the drive belts. Refer to Disassembly and Assembly, "Drive Belt - Remove and Install".
Illustration 1 g01133935
Remove bolts (1). Leave two bolts (1) in adapter (2) at 180 degrees.Note: Record the distance between adapter (2) and the end of shaft (3) in order to ensure belt alignment during installation.
Illustration 2 g01133971
Loosen remaining bolts (1) .
Use Tooling (A) in order to release the tapered lock between adapter (2) and pulley (4) .
Remove remaining bolts (1), adapter (2), and pulley (4) .
Repeat Step 1 through Step 4 for the remaining pulley.Installation Procedure
Illustration 3 g01134024
Install pulley (4), adapter (2), and bolts (1). Repeat for the remaining pulley.Note: Verify that the distance between adapter (2) and the end of shaft (3) has not changed in order to ensure belt alignment during installation.End By: Install the drive belts. Refer to Disassembly and Assembly, "Drive Belt - Remove and Install".