FITTING 6H9049 - Caterpillar

There may be several specific safety messages on your generator set. The exact location and a description of the safety messages are reviewed in this section. Become familiar with all safety messages.Ensure that all the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off the engine.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Caterpillar dealer can provide new safety messages.
Electrical backfeed into a utility's distribution system can cause property damage, severe injury, or death. Do not connect generator to a building's main switch has been used to isolate the building from the utility power system. For permanent installations, connection shall only be a double throw switch as to isolate the building from a utility power system. Consult a qualified technician for proper use and installation. Comply with all applicable laws and electrical codes.
Illustration 1 g06009261
View of the Breaker box (left side of enclosure)
Illustration 2 g06011084
Safety films on Left Side of Enclosure Exterior
Illustration 3 g03875743
Side view of the generator set inside the enclosure (left side)
Illustration 4 g06010061
Side view of the generator set inside the enclosure (right side)
Illustration 5 g03877573
Top view of the enclosure
Universal Warning (1)This safety message is on the enclosure for the control panel.
Illustration 6 g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Automatic Starting (2)This safety message is on the sides of the enclosure and on the enclosure for the control panel.
Illustration 7 g01392484
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Electrocution (3)
This safety message is on the enclosure for the circuit breaker and also on both sides of the enclosure.
Illustration 8 g01392482
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious i